Acer TravelMate 2200 Acer TravelMate 2200, TravelMate 2700 and Aspire 1670 Ser - Page 67

Remove the Speaker Set, Disassemble the LCD module

Page 67 highlights

6. Remove six screws that secure the main and secondary fan. 7. Remove the secondary fan from the lower case. 8. Remove the main fan from the lower case. Remove the Speaker Set 1. Disconnect the speaker set cable from the main board. 2. Remove the screw that secure the speaker set on both side. 3. Remove the speaker from the lower case. Disassemble the LCD module 1. Detach four screw caps as shown. 2. Remove four screws that secure the LCD bezel. 3. Snap off the snaps of the LCD bezel with fingers and detach the LCD bezel carefully. 4. Disconnect the inverter cable with tweezers and remove the inverter cable from the groove 5. Remove one screw that secures the inverter board. 6. Pull up the inverter board 61 Chapter 3

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.