Acer U5200 W5 quick start guide for LAM model
Acer U5200 Manual
 |
View all Acer U5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Acer U5200 manual content summary:
- Acer U5200 | W5 quick start guide for LAM model - Page 1
Guide to components c Select and connect to the access point labeled AcerProjector, or AcerProjectorXXXX. 12 3 English 1 Mini USB 2 LAN port 3 USB Type A 2. Turn on the projector d Connect the projector splash screen Projector ID: 7362 1. The software is stored on the Acer Projector Gateway. - Acer U5200 | W5 quick start guide for LAM model - Page 2
log in to your Acer Projector. Note: Make sure your personal firewall doesn't block the Acer eProjection Management application. Once your're connected, the PC screen will be projected. Note: For more information, please refer to the online manual. All the illustrations in this quick guide are for
-
1 -
2
 |
 |
English
A. Hardware connection:
1. Guide to components
2. Turn on the projector
3. Check the information on the splash
screen
Check
Projector ID
,
Projector Name (SSID)
,
Server IP
and
WEP
on the splash screen. The
Server IP
will be assigned by the network
with DHCP enabled. Ask your supervisor for
the wireless connection WEP key when WEP is
enabled.
4. Connect to network
a
Switch on your system, and activate your
wireless LAN.
b
Scan for avaliable WLAN APs using your
preferred WLAN manager.
c
Select and connect to the access point labeled
AcerProjector
, or
AcerProjectorXXXX
.
d
Connect the projector to your LAN for a wired
connection.
B. Software installation:
1.
The software is stored on the Acer
Projector Gateway.
Please follow the steps below to
download and install:
a
Open the internet browser.
b
You will automatically be taken to the
welcome page.
c
Enter the Server IP address into your browser’s
address bar if you do not see the welcome
page.
1
Mini USB
2
LAN port
3
USB Type A
Projector ID: 7362
Projector Name (SSID)
:
AcerProjector 001
Server IP
: 192.168.100.10
WEP Key
: None
3
2
1