Acer U5200 W5 quick start guide for LAM model - Page 1
Acer U5200 Manual
View all Acer U5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
A. Hardware connection: b Scan for avaliable WLAN APs using your preferred WLAN manager. 1. Guide to components c Select and connect to the access point labeled AcerProjector, or AcerProjectorXXXX. 12 3 English 1 Mini USB 2 LAN port 3 USB Type A 2. Turn on the projector d Connect the projector to your LAN for a wired connection. B. Software installation: 3. Check the information on the splash screen Projector ID: 7362 1. The software is stored on the Acer Projector Gateway. Please follow the steps below to download and install: a Open the internet browser. b You will automatically be taken to the welcome page. Projector Name (SSID) : AcerProjector 001 Server IP : 192.168.100.10 WEP Key : None Check Projector ID, Projector Name (SSID), Server IP and WEP on the splash screen. The Server IP will be assigned by the network with DHCP enabled. Ask your supervisor for the wireless connection WEP key when WEP is enabled. 4. Connect to network a Switch on your system, and activate your wireless LAN. c Enter the Server IP address into your browser's address bar if you do not see the welcome page.