Acer Veriton 3000 Veriton 3000 Service Guide - Page 56

System Information The following screen appears if you select System Information from the main menu. System Information Processor Pentium III Processor Speed 600EB MHz Level 1 Cache 32 KB, Enabled Level 2 Cache 256 KB, Enabled Diskette Drive A 1.44 MB 3.5-inch Diskette Drive B None IDE Primary Channel Master .......Hard Disk, 20520 M.B. IDE Primary Channel Slave ........None IDE Secondary Channel Master .....DVD IDE Secondary Channel Slave ......None Total Memory 160 MB + 32768 KB Sh Memory 1st Bank SDRAM, 128 MB 2nd Bank SDRAM, 64 MB Serial Port 1 3F8h, IRQ 4 Serial Port 2 Disabled Parallel Port 378h, IRQ 7 PS/2 Mouse Installed This page shows the current basic configuration of your system. The following table describes the parameters found in the System Information pages: Parameter Description Format Processor Specifies the type of processor currently installed in your system. Processor Speed Specifies the speed of the processor currently installed in your system. Speed in MHz, EB, E, B, A Level 1 Cache Specifies the first-level or the internal memory (i.e., the memory integrated into the processor) size, and whether it is enabled or disabled. Cache size in KB Level 2 Cache Specifies the second-level cache memory size currently supported by the system. Cache size in KB Diskette Drive A Shows the diskette drive A type. Capacity, dimension Diskette Drive B Shows the diskette drive B type. Capacity, dimension IDE Primary Channel Master Specifies the current configuration of the IDE Drive type, capacity device connected to the master port of the primary IDE channel. IDE Primary Channel Slave Specifies the current configuration of the IDE device connected to the slave port of the primary IDE channel. Drive type, capacity IDE Secondary Channel Master Specifies the current configuration of the IDE device connected to the master port of the secondary IDE channel. Drive type, capacity IDE Secondary Channel Slave Specifies the current configuration of the IDE device connected to the slave port of the secondary IDE channel. Drive type, capacity 24 Chapter 2