Acer X233H User Manual - Page 20

X233H TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. (VGA Mode) Problems Current Status LED ON LED OFF No Picture LED displays amber color Unstable Picture Abnormal Picture Display is missing, center shift, or too small or too large in display size Remedy  Using OSD, adjust brightness and contrast to maximum or reset to their default settings.  Check the power switch.  Check if AC power cord is properly connected to the monitor.  Check if video signal cable is properly connected at the back of monitor.  Check if the power of computer system is ON.  Check if the specification of graphics adapter and monitor is in compliance which may be causing the input signal frequency mismatch.  Using OSD, adjust RESOLUTION, CLOCK, CLOCK-PHASE, H-POSITION and VPOSITION with non-standard signals.  Using OSD, in case of missing full-screen image, please select other resolution or other vertical refresh timing.  Wait for a few seconds after adjusting the size of the image before changing or disconnecting the signal cable or powering OFF the monitor. (DVI Mode) Problems Current Status LED ON LED OFF No Picture LED displays amber color Remedy  Using OSD, adjust brightness and contrast to maximum or reset to their default settings.  Check the power switch.  Check if AC power cord is properly connected to the monitor.  Check if video signal cable is properly connected at the back of monitor.  Check if the power of computer system is ON. EN- 19