Acer X193 X183H / X193HQ Service Guide - Page 23
Troubleshooting continued
View all Acer X193 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
22 ACER X193HQ Go to cover page 5.3 Checking the back light unit 5. Troubleshooting (continued) Is +22V supplied to inverter PWB ? (by the power board) NG OK Failure Point 1) Power board of Inverter part failure. Check the BKLT_EN signal of the DC input P301 pin 1 at TTL high level. NG OK Failure Point 1) printed wire broke between P301 pin1, R303 and I305 pin 88. 2) I305 is failure. Check the BKLT_ADJ signal of the input P301 pin3 from I305 pin86 is a PWM signal. NG OK Failure Point 1) printed wire broke between P301 pin3, R304,R357 and I305 pin11. 2) Q302 is failure. Failure Point 1) Back light unit of LCD module is failure. 2) Inverter Cable disconnect