Adaptec 29160 Installation Guide - Page 10
Connecting Wide SCSI Devices - connector
UPC - 760884150788
View all Adaptec 29160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installation Guide STEP 1 Connecting Wide SCSI Devices You can connect Wide SCSI devices to the internal LVD/SE connectors. If you do this, we recommend that you connect them to the SCSI Channel A LVD/SE connector and that you connect all Ultra160 and Ultra2 devices to the SCSI Channel B connector. Follow these steps to connect Wide SCSI devices: Locate a 68-pin internal Wide SCSI cable. STEP 2 Plug one end of the cable to the Channel A internal 68-pin connector on the Adaptec SCSI Card 39160. . STEP 3 STEP 4 STEP 5 Plug the other end of the cable to a terminated Ultra/Fast Wide SCSI device. If you have other Ultra/Fast Wide SCSI devices, attach them to the connectors between the two ends of the cable. Be sure these other devices are unterminated. Connect a power cable from your computer's internal power supply to each internal device. 8