Adaptec 29160 Installation Guide - Page 11

Adaptec SCSI Card 39160 Connecting Internal Ultra/Fast Narrow SCSI Devices CAUTION Do not connect SCSI devices to more than two of the three SCSI Channel A connectors at the same time. STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 If you have internal Ultra/Fast Narrow SCSI devices with standard 50-pin connectors, you can connect them to the 50-pin internal SE Narrow SCSI connector. Follow these steps to connect the devices: Locate a 50-pin internal Ultra Narrow SCSI cable. Plug one end of the cable to the 50-pin internal SE Narrow SCSI connector, positioned vertically on the right side of the Adaptec SCSI Card 39160 (refer to the figure on page 1). Plug the other end of the cable to a terminated Ultra/Fast Narrow SCSI device. If you have other Ultra/Fast Narrow SCSI devices, attach them to the connectors between the two ends of the cable. Be sure these other devices are un-terminated. Connect a power cable from your computer's internal power supply to each internal device. 9