Adaptec 2930 User Guide - Page 21

Troubleshooting 6 Connect other external SCSI devices by cabling each device to the previous one, as shown. Terminate only the SCSI device at the end of the chain. Unterminated devices Terminated device 7 Connect all power cables to the external SCSI devices and the computer. 8 Turn on all external SCSI devices and allow them to power up. Then turn on the computer. 9 Install any software included with your SCSI devices. Troubleshooting If you encounter any problems after installation, check the following items first: I Are all SCSI devices powered on? I Are all SCSI cables and power cables properly connected? I Is the PowerDomain 2930 firmly seated and secured in the PCI expansion slot? Turn off the power before checking the card. I Does each device on the SCSI bus have a unique SCSI ID? I Is the SCSI chain properly terminated? Refer to your device documentation and to the related sections in this User's Guide. If you are still unable to resolve a problem, refer to the Adaptec Web site at http://www.adaptec.com for additional troubleshooting information and direction. 12