Airlink AP671W Quick Installation Guide - Page 2
Step 2, Step 3, Step 4, Step 5 - default password
UPC - 658729081703
View all Airlink AP671W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Step 2 Click Next to start the configuration. Step 4 Make sure the LEDs of POWER, WLAN and the LAN port that is connected to the Router are lit. If not, try the above steps again. Step 3 Connect one end of a network cable to a LAN port (1~5) of the AP and connect the other end to a LAN port of the router. Power on the AP. LED Indicators: LED Light Status POWER On On WLAN Off Flashing On LAN 1~5 Off Flashing Description Router is powered on. WPS setup is in progress. Wireless network is switched off. Wireless network is ready and WPS setup is not in progress. LAN port is connected. LAN port is not connected. LAN port is transferring or receiving data. Step 5 Enter the AP's password to log in to the AP. The default password is "admin". It is recommended to change the AP's password to protect it from being accessed by other users. If you do not wish to change the current password, you can leave New Password and Confirm New Password blank. Click Log in.