Airlink AP671W Quick Installation Guide - Page 4
Universal Repeater, 3 AP Client, 4 Point-to-Point / Point-to-MultiPoint / WDS Bridge - manual
UPC - 658729081703
View all Airlink AP671W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
8.2 Universal Repeater Click on Site Survey, select the wireless router or AP you wish to repeat on the popup Wireless Site Survey window and click Connect. Configure a network name in Main SSID for the repeater to be identified. 8.4 Point-to-Point / Point-to-MultiPoint / WDS Bridge Same setup procedure applies to Point-to-Point Bridge, Point-to-MultiPoint Bridge and WDS Bridge modes. For bridge mode, you need at least two Access Points. We will use Point-to-Point Bridge as an example. Select a channel number you wish to use and enter the MAC address of the other Access Point for the bridge. Click Next. 8.3 AP Client Click on Site Survey, select the wireless router or AP you wish to connect on the popup Wireless Site Survey window and click Connect, or enter your wireless network's SSID manually. Click Next. Step 9 Configure the wireless security settings. It is recommended to use WPA2-PSK(AES) which is the most secured encryption for general users.