Airlink APSUSB201W Quick Installation Guide

Airlink APSUSB201W Manual

Get Airlink APSUSB201W PDF manuals and user guides View all Airlink APSUSB201W manuals
Add to My Manuals
Save this manual to your list of manuals

Airlink APSUSB201W manual content summary:

  • Airlink APSUSB201W | Quick Installation Guide - Page 1
    1-Port Wireless USB 2.0 Print Server Model # APSUSB201W Quick Installation Guide Ver. 2A
  • Airlink APSUSB201W | Quick Installation Guide - Page 2
    the Ethernet cable after a wireless connection is established. Step 2 Make sure the printer is powered OFF, then connect one end of the USB cable to the USB port of the Print Server and attach the other end of the cable to the USB port of the printer. Step 3 Power ON the printer. Step 4 Plug one end
  • Airlink APSUSB201W | Quick Installation Guide - Page 3
    Section 2 Installing PS Utility Step 1 Insert the provided CD and wait for the setup menu to appear. Step 2 Click on PS Utility. Note: If the setup menu does not appear automatically after you have inserted the CD, go to Start, Run, type D:\autorun.exe (where D is the letter of your CD drive) and
  • Airlink APSUSB201W | Quick Installation Guide - Page 4
    Step 4 Click Next. Step 5 Click Yes. Step 6 Click Finish.
  • Airlink APSUSB201W | Quick Installation Guide - Page 5
    Section 3 Configuring Network Setting Before configuring the Print Server's network setting, please take note of your computer's TCP/IP setting. Step 1 Click on Start, Run, and type command (for Windows 95/98/ME) or cmd (for Windows 2000/ XP) and click OK. Step 2 At the command prompt, type ipconfig
  • Airlink APSUSB201W | Quick Installation Guide - Page 6
    Step 6 In the IP Address field, enter a valid IP address, subnet mask, and default gateway that matches your local area network. For example: If your computer's IP Address is 192.168.1.100, enter the same three numbers: 192.168.1 in the corresponding fields. Note: You can leave the last IP Address
  • Airlink APSUSB201W | Quick Installation Guide - Page 7
    1 Run the PS Utility by going to Start, (All) Programs, PS Utility, PS Utility v2.00. Step 2 Make sure the Print Server is detected under the Device Name. Step 3 Click on Show Web Setup to display the Print Server's Web Configuration Utility. Step 4 Make sure the Printer Status displays On line.
  • Airlink APSUSB201W | Quick Installation Guide - Page 8
    fails to print a test page, please check the printer compatibility list on our web site at www.airlink101.com for a list of compatible printers. If your printer is not on the list, it may not be compatible with the Print Server. Step 6 Once the printer successfully prints out a test page, you may
  • Airlink APSUSB201W | Quick Installation Guide - Page 9
    : Make sure you have installed the printer driver locally on every computer that will use the print server in your network before running the PS sure to run the PS Wizard on all the computers that will use the print server in your network. Step 1 Insert the provided CD and wait for the setup menu
  • Airlink APSUSB201W | Quick Installation Guide - Page 10
    Step 3 Click Next. Section 4 Step 4 Select the printer that is connected to the print server and click Next.
  • Airlink APSUSB201W | Quick Installation Guide - Page 11
    Step 5 Double-click on the Print Server Name, select the Printer Port Name, and click Next. Step 6 Click Finish and OK. (For Windows 95/98/ME, you'll need to reboot the computer). Step 7 Run the PS Wizard on all the computers in your network that will use the print server.
  • Airlink APSUSB201W | Quick Installation Guide - Page 12
    final step in setting up the Print Server is to perform an operating system print test. Please note that the instructions below are for Windows XP, but the steps are similar for all the other Windows operating systems. Step 1 Click on Start, Settings, Printers and Faxes. Step 2 Right-click on the
  • Airlink APSUSB201W | Quick Installation Guide - Page 13
    Step 3 Click on the Print Test Page button. Windows should print out a test page. You have successfully configured the Print Server for printing.
  • Airlink APSUSB201W | Quick Installation Guide - Page 14
    should use a wired connection to configure the following wireless settings before unplugging the network cable from the Print Server. Step 1 Open the web browser and type in the IP address of your Print Server. (Default is 192.168.1.254) Step 2 Verify the Printer Status is On line. Step 3 Click on
  • Airlink APSUSB201W | Quick Installation Guide - Page 15
    Connection Mode is set to Infrastructure. Step 5 Type in the SSID (network name) of your wireless router in the SSID field, or use the drop-down menu directly below the SSID field to choose your wireless router. Note: you can also click on the Site Survey button to view all the available
  • Airlink APSUSB201W | Quick Installation Guide - Page 16
    also need to set the identical encryption settings on the Print Server. For more information regarding how to set the encryption settings, please refer to the user's manual on the provided CD. Step 8 Verify your wireless connection with the steps outlined in Section 4, Verifying Network Connection
  • Airlink APSUSB201W | Quick Installation Guide - Page 17
    set the Connection Mode to Ad-Hoc. Step 2 Rename the SSID of the Print Server or keep it as default. Step 3 Set the desired Wireless Channel. Step 4 Click Save. Step 5 Click on Management and go to Wireless. Verify that the Connection Mode is Ad-Hoc and the Link is Yes. Also verify that
  • Airlink APSUSB201W | Quick Installation Guide - Page 18
    successfully configured the Print Server for wireless printing in Ad-Hoc mode. For more information on how to use the Web Configuration Utility or setup for Mac OS, please refer to the User's Manual in the provided CD. Section 9 Technical Support E-mail: [email protected] Toll Free: 1-888
  • Airlink APSUSB201W | Quick Installation Guide - Page 19
    and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink101. All other product or service names are the property of their respective holders. AirLink101 products are protected under numerous U.S. and foreign patents and
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
Quick Installation Guide
Model # APSUSB201W
Ver. 2A
1-Port Wireless USB 2.0 Print Server