Airlink APSUSB201W Quick Installation Guide - Page 14
Configuring Wireless Printing
View all Airlink APSUSB201W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Section 7 Configuring Wireless Printing The following section describes how to setup the Print Server for wireless printing. It is strongly recommended that you test the Print Server with a wired connection first before moving on to configure wireless printing. Note: You should use a wired connection to configure the following wireless settings before unplugging the network cable from the Print Server. Step 1 Open the web browser and type in the IP address of your Print Server. (Default is 192.168.1.254) Step 2 Verify the Printer Status is On line. Step 3 Click on Configuration and then Wireless.
Section 7
Configuring Wireless Printing
The following section describes how to setup the Print Server for wireless printing. It is strongly
recommended that you test the Print Server with a wired connection first before moving on to configure
wireless printing.
Step 3
Click on
Configuration
and then
Wireless
.
Note:
You should use a wired connection to configure the following wireless settings before unplugging
the network cable from the Print Server.
Step 1
Open the web browser and type in the IP address of your Print Server. (Default is
192.168.1.254
)
Step 2
Verify the Printer Status is
On line
.