Airlink AWLL3055 User Manual

Airlink AWLL3055 Manual

Get Airlink AWLL3055 PDF manuals and user guides View all Airlink AWLL3055 manuals
Add to My Manuals
Save this manual to your list of manuals

Airlink AWLL3055 manual content summary:

  • Airlink AWLL3055 | User Manual - Page 1
    802.11g USB Adapter with +10dBi Antenna Model # AWLL3055 User's Manual Ver. 1A
  • Airlink AWLL3055 | User Manual - Page 2
    Contents 1. INTRODUCTION 4 1.1 Features ...4 1.2 Package Contents...4 2. INSTALLATION PROCEDURES 5 2.1 Install Utility Software 5 2.2 Install Driver ...8 3. CONFIGURING USB ADAPTER AS A WIRELESS CLIENT 9 3.1 Configuring General Settings 13 3.2 Configuring Encryption Security 14 3.3 Configuring
  • Airlink AWLL3055 | User Manual - Page 3
    equipment must be installed and operated in accordance with provided instructions and a minimum 5 cm spacing must be provided between computer mounted antenna and person's body (excluding extremities of hands, wrist and feet) during wireless modes of operation. This device complies with Part 15 of
  • Airlink AWLL3055 | User Manual - Page 4
    ) encryption • Supports software AP function 1.2 Package Contents Before you begin the installation, please check the items of your package. The package should include the following items: • One Wireless USB Adapter • One Quick Installation Guide • One Driver & Utility CD (with User's Manual) If any
  • Airlink AWLL3055 | User Manual - Page 5
    installing the utility software, DO NOT insert the USB adapter into your computer. If the adapter is inserted already, Windows will detect the adapter and request for a driver. Click Cancel to quit the wizard and remove the adapter from your computer. Step 1 Insert the provided Driver and Utility CD
  • Airlink AWLL3055 | User Manual - Page 6
    Step 3 Click Next at the welcome screen. Step 4 Click Next to accept the default destination location for the driver to be installed in or click Browse to select the desired location. 6
  • Airlink AWLL3055 | User Manual - Page 7
    Step 5 For Windows XP, click Continue Anyway at the Windows Logo Compatibility screen. For Windows 2000, click Yes at the Digital Signature screen. Step 6 Remove the Driver & Utility CD from your CD drive and then restart your computer. 7
  • Airlink AWLL3055 | User Manual - Page 8
    -screen instructions to complete the installation. For Windows 98SE and ME users, you may be prompted to insert the Windows 98SE or ME CD during the driver installation. Be sure to have your Windows 98SE or ME CD ready. Step 1 After the computer is restarted, insert the USB adapter into the USB port
  • Airlink AWLL3055 | User Manual - Page 9
    drop-down menu. Station mode is the default selection and should be selected if you want to connect to a wireless router/access point or conduct peer-to-peer networking. To open the utility, go to Start, (All) Programs, IEEE 802.11g USB Wireless LAN Adapter, IEEE 802.11g USB Wireless LAN Utility. 9
  • Airlink AWLL3055 | User Manual - Page 10
    Note to Windows XP Users: If you encounter the Wireless Zero Configuration dialog box, click Yes to enable the Wireless LAN Utility to configure your USB adapter. Step 1 Select the SSID of your wireless router/access point from the Available Network list and click on the Connect this site button. 10
  • Airlink AWLL3055 | User Manual - Page 11
    more information regarding Access Point, please refer to the next section, 4. Configuring USB Adapter as an Access Point. Network Adapter: Displays the name of the USB adapter. Available Network: Lists all the available wireless router/access point in your area. You can click on the Refresh button
  • Airlink AWLL3055 | User Manual - Page 12
    Current Network Information: Displays the network information of the wireless router/access point that the USB adapter is currently connected to. More Setting: Click on this button to access the USB adapter's configuration settings, including WEP and WPA encryption settings. 12
  • Airlink AWLL3055 | User Manual - Page 13
    only. Tx Rate: Select the desired transmission rate, or leave the default setting of Auto to allow the adapter to automatically select the optimum rate. SSID: You can manually enter the SSID of the wireless router/access point you wish to connect to. Any (check box): Allows you to connect to any
  • Airlink AWLL3055 | User Manual - Page 14
    WEP Key Setting and then click Apply to save the settings. Note: The WEP Key settings must be identical to the WEP settings of the wireless router/access point you wish to connect to. Key Length: Select the appropriate encryption key length. Default Key ID: Select which of the four Key
  • Airlink AWLL3055 | User Manual - Page 15
    characters (0-9, A-F) or 19 ASCII characters (any number of letter). After you have applied the changes, return to the utility's main screen and select the wireless router/access point you wish to connect to. Click Yes at the Use Previous WEP Setting dialog box to connect to the encrypted
  • Airlink AWLL3055 | User Manual - Page 16
    passphrase in the Passphrase field under the Pre-shared Key section and click Apply. (The passphrase must be identical to the passphrase set on your wireless router/access point and it has to be between 8 to 63 ASCII characters long). 16
  • Airlink AWLL3055 | User Manual - Page 17
    3.3 Configuring Profile After you have configured all the settings, you can save your settings as a profile so you don't have to re-configure them the next time. Type in a name for the profile in the Profile name field and click Save Current. To load a profile, select the profile from the drop-down
  • Airlink AWLL3055 | User Manual - Page 18
    More Setting window to configure the adapter's advanced settings. User Interface: select the language for the adapter's user interface adapter will get its country setting from the access point. • User Select: choose your country. PSP XLink Mode: Support SONY PSP X-Link Mode WMM QoS Mode: Support
  • Airlink AWLL3055 | User Manual - Page 19
    3.5 Information Click on Information from the More Setting window to view the driver and utility's information. 19
  • Airlink AWLL3055 | User Manual - Page 20
    Internet if you configure the USB adapter as an access point. To allow other wireless clients to access the Internet, you will need to configure your computer as a router and a DHCP server. The vendor will not provide any technical support in regards to the USB adapter functioning as an access point
  • Airlink AWLL3055 | User Manual - Page 21
    the transmission signal power. Click Apply to submit the changes. Bridge Adapter: If you have another Ethernet card installed in your computer, you can select the other Ethernet card as the bridge adapter. This will allow any wireless client that is connected to the access point to be bridged to
  • Airlink AWLL3055 | User Manual - Page 22
    System or Shared Key. Fragmentation Threshold: choose from 256 to 2346 bytes. RTS/CTS Threshold: choose from 0 to 2347 bytes. Preamble: select Long or Short. MAC Address Filter: click Setting. 22
  • Airlink AWLL3055 | User Manual - Page 23
    filter. Accept: only accepts connection from the MAC address listed. (Connection attempts from MAC address not in the list will be rejected). Reject: only rejects connection from the MAC address listed. (Connection attempts from MAC address not in the list will be accepted, provided the client
  • Airlink AWLL3055 | User Manual - Page 24
    Operating system • Plug-and-Play compatible • Windows XP/2000/ME/98SE Warranty • 1-Year Limited Warranty UPC Code • 6 58729 08 021 8 5.2 Troubleshooting A. If the utility cannot be opened or it reports that the adapter is not found, uninstall the driver and utility and try installing again. You
  • Airlink AWLL3055 | User Manual - Page 25
    Expand Network adapters and you should see IEEE 802.11g USB Wireless LAN. If there is no yellow question mark or exclamation mark, the driver is installed properly. B. If you do not see your wireless router/access point in the Available Network list, reset your wireless router/access point and click
  • Airlink AWLL3055 | User Manual - Page 26
    router/access point). If you don't get an IP address, reset the wireless router/access point and then try ipconfig/renew again. E. You must have USB 2.0 compatible hardware and install the latest USB 2.0 driver from Microsoft in order to reach the data transfer rate of 54 Mbps. If your hardware
  • Airlink AWLL3055 | User Manual - Page 27
    Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com *Theoretical maximum wireless signal rate based on IEEE standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
802.11g USB Adapter
with +10dBi Antenna
Model # AWLL3055
User’s Manual
Ver. 1A