Alpine CDE-170 Owners Manual - Page 43

Installation Removing the protection collar and the bracket Before installing the unit, remove the protection collar and the bracket from the unit. 1 Pinch both edges of the protection collar , then pull it out. 182 mm (7 1/4 in) 53 mm (2 1/8 in) Catch 2 Mount the unit onto the bracket , then attach the protection collar . 2 Insert both release keys until they click, and pull down the bracket , then pull up the unit to separate. Face the hook inwards. Mounting the unit in the dashboard • Before installing, make sure the catches on both sides of the bracket are bent inwards 2 mm (3/32 in). • For Japanese cars, see"Mounting the unit in a Japanese car" (page 43). 1 Position the bracket inside the dashboard, then bend the claws outward for a tight fit. Notes • If the catches are straight or bent outwards, the unit will not be installed securely and may spring out. • Make sure the 4 catches on the protection collar are properly engaged in the slots of the unit. Mounting the unit in a Japanese car You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Alpine dealer. TOYOTA to dashboard/center console Bracket Existing parts supplied with your car Bracket 43-EN