Alpine CDE-175BT Owners Manual - Page 25
Audio Setup AUDIO, Display Setup DISPLAY
View all Alpine CDE-175BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
FW UPDATE (firmware update) Enters firmware update process: [YES], [NO]. Updating the firmware takes a few minutes to complete. During the update, do not turn the ignition to the OFF position, nor remove the USB device. Audio Setup (AUDIO) This setup menu is not available when the source is off and the clock is displayed. EQ PRESET Selects an equalizer curve from 10 equalizer curves or off: [USER], [FLAT](OFF), [POPS], [ROCK], [NEWS], [JAZZ], [ELEC DANCE], [HIP HOP], [EASY LIS], [COUNTRY], [CLASSICAL]. The equalizer curve setting can be memorized for each source. 3BAND PEQ (3Band Parametric Equalizer) Adjusts WIDTH, FREQUENCY and LEVEL for each after BAND is selected. BAND: [BASS], [MID], [TREBLE]. Setting contents: [WIDTH ], [CENTER FREQ], [LEVEL]. BALANCE Adjusts the sound balance: [R 15] - [0] - [L 15]. FADER Adjusts the relative level: [F 15] - [0] - [R 15]. SUBWOOFER (subwoofer) SUBW LEVEL (subwoofer level) Adjusts the subwoofer volume level: [OFF], [0] - [+15]. SUBW PHASE (subwoofer phase) Selects the subwoofer phase: [NORMAL], [REVERSE]. LPF FREQ (low pass filter frequency) Selects the subwoofer cut-off frequency: [80Hz], [100Hz], [120Hz]. HPF FREQ (high pass filter frequency) Selects the front/rear speaker cut-off frequency: [OFF], [80Hz], [100Hz], [120Hz]. AUX VOL (AUX volume level) Adjusts the volume level for each connected auxiliary device: [+18 dB] - [0 dB] - [-8 dB]. This setting negates the need to adjust the volume level between sources. (Available only when the AUX is selected.) BTA VOL (BLUETOOTH audio volume level) (CDE175BT/ CDE-172BT/ UTE-73BT only) Adjusts the volume level for each connected BLUETOOTH device: [+6 dB] - [0 dB] - [-6 dB]. This setting negates the need to adjust the volume level between sources. (Available only when the BT audio or Pandora® is selected.) Display Setup (DISPLAY) BLACK OUT If no operation is performed for a while with [ON] set, the display disappears automatically. Activates the black out: [ON], [OFF]. DIMMER Changes the display brightness: For CDE-175BT/ CDE-172BT/UTE-73BT: [OFF], [ON], [AUTO], [CLOCK]. ([AUTO] is available only when the illumination control lead is connected, and the head light is turned on.) For CDE-170: [OFF], [ON], [CLOCK]. To set this function to be active only during a fixed period, select [CLOCK], then set the start and end times. - To set the brightness when the dimmer function is activated: Set [DIMMER] to [ON], then adjust [BRIGHTNESS]. - To set the brightness when the dimmer function is deactivated: Set [DIMMER] to [OFF], then adjust [BRIGHTNESS]. The brightness setting is stored and applied when the dimmer function is activated or deactivated. BRIGHTNESS Adjusts the display brightness. The brightness level is adjustable: [1] - [10]. 25-EN