Alpine MRV-F900 Owners Manual - Page 16

Connection Mounting the Terminal Cover • The product's appearance can be improved by mounting the terminal cover on the main unit after installation. • Mount the terminal cover after the connections have been made and you have checked that operation is normal. 1 Open the door. 1) Use the included hexagonal wrench to remove the two hexagonal screws q fastening the door p. 2) Open the door p. q p Fig. 10 2 Mounting the terminal cover 1) Before mounting the terminal cover • Fasten the wires securely together in a position in which they will not touch the terminal cover. 2) Use the two included hexagon screws (M3) e to mount the included terminal cover w to the top surface of the terminal section. * Tighten the screws securely so that they do not come loose due to vibrations while the vehicle is moving. 3) After mounting the terminal cover • Check that the cords do not touch the terminal cover. * If the cords touch the terminal cover, the vibrations of the vehicle may damage the wires or cause short-circuiting. e p w 12-EN Fig. 11