Alpine PSS-20WRA Owners Manual - Page 11
Sound Bar Speaker Removal, Tweeter Assembly, Amplifier Mounting Bracket
View all Alpine PSS-20WRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
UNLIMITED Jeep Wrangler 11/20 Sound Bar Speaker Removal 1 Remove (3) T15 Torx screws from the speaker grills. 2 Disconnect and remove the factory speaker. Tweeter Assembly 1 Connect the tweeter to the X-Over network. 2 Insert the SPT-10WRA tweeter into the factory tweeter grill. Insert the mounting cap to secure the tweeter. *Front SPT-71C Tweeter and Network as shown. Amplifier Mounting Bracket Use the (4) 8/32" Phillips screws to attach the amplifier to the mounting bracket. Face the RCA connectors towards the open tab as shown.
Jeep Wrangler
UNLIMITED
±
11/20
Sound Bar Speaker Removal
1
Remove (3) T15 Torx screws from the speaker grills.
2
Disconnect and remove the factory speaker.
Tweeter Assembly
1
Connect the tweeter to the X-Over network.
2
Insert the SPT-10WRA tweeter into the factory
tweeter grill. Insert the mounting cap to secure the
tweeter.
Amplifier Mounting Bracket
Use the (4) 8/32” Phillips screws to attach the
amplifier to the mounting bracket. Face the RCA
connectors towards the open tab as shown.
*Front SPT-71C Tweeter
and Network as shown.