Alpine PSS-20WRA Owners Manual - Page 12
Tweeter Installation, Front Speaker Installation, Sound Bar Speaker Installation
View all Alpine PSS-20WRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
UNLIMITED Jeep Wrangler 12/20 Tweeter Installation 1 Connect the dash tweeters to the factory harness and mount X-Over network using a cable tie as shown below. 2 Push the X-Over through the tweeter opening and snap the tweeter into place. Front Speaker Installation NOTE: Polyfill installation is critical to the sound quality of the system, please do not skip this step 1 Mount the 6.5" speaker adapter using the factory screws. 3 Connect the speaker and mount it using the provided (8) 1" Truss-head Phillips screws. 2 Stuff the speaker enclosure with the supplied polyfill fiber. Separate the center creating an opening and pass the speaker cable through. Sound Bar Speaker Installation NOTE: Polyfill installation is critical to the sound quality of the system, please do not skip this step 1 Mount the speaker to the 6.5" speaker adapter using the (8) ½" Truss head screws. 2 Stuff the speaker cavity with the supplied polyfill fiber. Separate the center creating an opening and pass the speaker cable through. 3 Connect and mount the 6.5" coaxial speakers using the factory T15 Torx screws.