Amana AGG222VD Installation Instruction - Page 13
To Convert Surface Burners
View all Amana AGG222VD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
3. Open broiler door and remove broiler pan. The gas pressure regulator is located in the back right hand corner of the broiler compartment. A 3. Remove Natural gas orifice spuds using a 7 mm combination wrench. 4. Install LP gas orifice spuds using a 7 mm combination wrench. A. Gas pressure regulator IMPORTANT: Do not remove the gas pressure regulator. 4. Remove the cap from the gas pressure regulator using a flat-blade screwdriver. NOTE: Do not remove the spring beneath the cap. A A. Cap 5. Turn the cap over so the LP is visible. A A B A. Spud B. Holder NOTE: This range cooktop is equipped with 2 standard burners and 2 super burners. Spud size and location remain the same. 2 superburners.Spud size/location rem ain the sam e. 6. Reinstall the cap. A. Cap To Convert Surface Burners 1. Remove burner grate, burner caps and burners. A Standard Burner 78 Super Burner 88 Super Burner 88 Standard Burner 78 B 5. Place the Natural gas orifice spuds in the parts bag for future use and keep with the bag containing literature. 6. Reinstall burners, burner caps and burner grates. A. Burner cap B. Burner 2. Locate LP gas orifice spuds for top burners in the literature bag included with the range. Two LP gas spuds are stamped "88" and two "78." 13