Amana AGR4433XDB Installation Instruction - Page 14

5. Turn the cap over so that N or NAT is visible. A 6. Reinstall the cap. A. Cap To Convert Surface Burners 1. Remove burner grate, burner caps and burners. A B For models with 4 standard burners: Std Burner 149 Std Burner 149 Std Burner 149 Std Burner 149 For models with 3 standard burners and 1 super burner: Std Burner 149 Super Burner 165 Std Burner 149 Std Burner 149 A. Burner cap B. Burner 2. Locate the Natural gas orifice spuds for top burners in the literature bag included with the range. Three natural gas spuds are stamped "149" and one "165." 3. Remove the LP gas orifice spuds using a 7 mm combination wrench. 4. Install the Natural gas orifice spuds using a 7 mm combination wrench. 5. Place LP gas orifice spuds in the parts bag for future use and keep with the bag containing literature. 6. Reinstall burners, burner caps and burner grates. To Convert Oven Burner 1. Open the oven door and remove oven racks, oven tray, and flame spreader and set aside. 2. Lift oven burner. The orifice spud is behind the oven burner air shutter. A B A. Spud B. Holder NOTE: Depending on model, the range cooktop may be equipped with 4 standard burners or 3 standard burners and 1 super burner. Spud size and location remain the same. A B A. Oven burner B. Air shutter 3. Locate Natural gas orifice spud stamped "47" in the bag containing literature supplied with the range. 4. Use a ³⁄₈" combination wrench and remove the LP gas orifice spud. 14