Amana NTW4750Y Use and Care - Page 15
Not selecting Fabric Softener option.
View all Amana NTW4750Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.amana.com/help for assistance and to possibly avoid a service call. If you experience Possible Causes Washer not performing as expected (cont.) Sand, pet hair, lint, etc. Heavy sand, pet hair, lint, and on load after washing detergent or bleach residues may require additional rinsing. Solution Add an Extra Rinse to the selected cycle. Load is tangling Not cleaning or removing stains Incorrect dispenser operation Washer not loaded as recommended. See "Using Your Washer" section. Select a cycle with a slower wash action and spin speed; however, items will be wetter than those using a higher speed spin. See the "Cycle Guide" to match your load with the best cycle. Load garments in loose heaps evenly around the washplate. Do not load garments directly over the center of the washplate. Reduce tangling by mixing types of load items. Use the recommended cycle for the type of garments being washed. Wash load not completely covered in water. Added more water to washer. Washer not loaded as recommended. Washer senses load size and adds correct amount of water. This is normal and necessary for clothes to move. Added water lifts the laundry off the washplate, resulting in less effective cleaning. Washer is less efficient at cleaning when tightly packed. Load garments in loose heaps evenly around the washplate. Load with dry items only. Add only 1 or 2 garments after washer has started. Adding detergent on top of load. Not washing like colors together. Add detergent, oxi products, and color-safe bleach to the bottom of the basket before adding the load items. Wash like colors together and remove promptly after the cycle is complete to avoid dye transfer. Not using HE detergent or using too much HE detergent. Not using correct cycle for fabric type. Not using dispenser or Downy Ball®. Not selecting Fabric Softener option. The suds from regular detergent can keep washer from operating correctly. Use only HE detergent. Be sure to measure correctly. Always measure detergent and follow manufacturer's directions based on load size and soil level. Use a higher soil level cycle option and warmer wash temperature to improve cleaning. If using Quick Wash cycle, wash only a few items. Use Super Wash and Normal Heavy cycle for tough cleaning. See the "Cycle Guide" to match your load with the best cycle. Use dispenser for chlorine bleach and Downy Ball® for fabric softener to avoid staining. Load dispenser before starting a cycle. Do not add products directly onto load. Always select Fabric Softener option. Cycles that use spray rinsing will add additional water for proper fabric softener dispensing when option is selected. Clogged dispenser. Use only liquid chlorine bleach in the bleach dispenser. 15