Apple M9454LL/A User Manual - Page 63
Attach the ribbon cable connector and the power cable to the back of the replacement
View all Apple M9454LL/A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
10 Carefully remove the ribbon cable from the top of the original drive and transfer it to the replacement drive. Important: Reusable adhesive tape on the underside of the ribbon cable attaches the cable to the drive. When removing the cable from the original drive, be careful to keep the tape with the cable. 11 Attach the ribbon cable connector and the power cable to the back of the replacement drive. 12 Insert the drive part way into the drive bay and bend the free end of the ribbon cable, then pull it down through the opening in the sheet metal divider at the back of the optical drive bay. Attach the ribbon cable to the back of the optical drive. Slide the other end of the ribbon cable down through the opening in the sheet metal divider inside the computer. Install the metal shield on the optical drive. Install the four metal optical drive guide pins into the bottom of the drive. Attach the power cable to the back of the optical drive. Chapter 4 Working Inside Your Computer 63