Apple M9454LL/A User Manual - Page 81
Power Supply, Power Requirements for Devices You Can Connect, System Clock and Battery
View all Apple M9454LL/A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
 Signal-to-noise ratio: Greater than 90 dB  Total harmonic distortion: Less than -85 dB (0.006 percent)  Channel separation: Greater than 75 dB Analog audio line-out  Output voltage: 1.4 Vrms (+4 dBµ)  Output impedance: 24 ohms  Signal-to-noise ratio: Greater than 90 dB  Total harmonic distortion: Less than -80 dB (0.01 percent)  Channel separation: Greater than 65 dB Power Supply AC line input  Voltage ranges: 100-120 V alternating current (AC) and 200-240 VAC  Current: Maximum of 12 amperes (A) (low voltage range) or 6 A (high voltage range)  Frequency: 50-60 Hz DC display output Dependent on video card Power Requirements for Devices You Can Connect Expansion cards Combined maximum power consumption for all four PCI Express slots should not exceed 200 watts (W). USB devices Each of the computer's built-in USB ports is allotted 500 mA. FireWire devices The computer can provide up to 37.5 W total to the FireWire ports. System Clock and Battery Your computer has CMOS custom circuitry with a long-life battery. Battery Use a 3 V, CR 2032 Lithium coin cell replacement battery (see "Replacing the Internal Backup Battery" on page 68). Appendix A Specifications 81