Ariens Zoom XL 48 Owners Manual - Page 18

Service And Adjustments, Tipping Seat Forward

Page 18 highlights

Interval Task Follow Engine Manual Maintenance Each Use Schedule Action Perform scheduled engine maintenance. Refer to Engine 1 Manual for detailed instructions. NOTE: To drain the oil, use the oil drain hose (1) supplied with unit, not the drain plug that is shown in the Engine Manual. Check Battery Lubricate Unit Keep battery and battery terminals clean (see Cleaning Battery and Battery Cables on page 22). Apply grease to zerk (1) on each front wheel 25 Hours or Every Season 1 50 Hours Check Check mower blade mounting hardware and all other fasteners. or Every Fasteners Replace fasteners that are missing or damaged. Tighten all nuts and Season bolts to the correct torque value. Check All 100 Belts Hours or Every Season Replace worn or deteriorated belts. • Check hydrostatic belt (see REPLACING HYDROSTATIC BELT on page 25 for hydrostatic belt location). • Check PTO belt (see REPLACING PTO BELT on page 24 for PTO belt location). SERVICE AND ADJUSTMENTS WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding. TIPPING SEAT FORWARD Move steering levers to neutral position and rotate handles outward. Tip seat forward. Seat Tipped Forward GB - 18 Figure 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

GB - 18
TIPPING SEAT FORWARD
Move steering levers to neutral position and
rotate handles outward. Tip seat forward.
Each Use
Follow
Engine
Manual
Mainten-
ance
Schedule
Perform scheduled engine
maintenance. Refer to Engine
Manual for detailed instructions.
NOTE:
To drain the oil, use the oil
drain hose (1) supplied with unit, not
the drain plug that is shown in the
Engine Manual.
25 Hours
or Every
Season
Check
Battery
Keep battery and battery terminals clean (see
Cleaning Battery and
Battery Cables
on page 22).
Lubricate
Unit
Apply grease to zerk (1) on each
front wheel
50 Hours
or Every
Season
Check
Fasteners
Check mower blade mounting hardware and all other fasteners.
Replace fasteners that are missing or damaged. Tighten all nuts and
bolts to the correct torque value.
100
Hours or
Every
Season
Check All
Belts
Replace worn or deteriorated belts.
Check hydrostatic belt (see
REPLACING HYDROSTATIC BELT
on page 25 for hydrostatic belt location).
Check PTO belt (see
REPLACING PTO BELT
on page 24 for
PTO belt location).
Interval
Task
Action
1
1
SERVICE AND ADJUSTMENTS
WARNING:
AVOID INJURY. Read
and understand the entire
Safety
section before proceeding.
Figure 9
Seat Tipped Forward