Asko D5636XLHS/TH Installation instructions EN - Page 4

XXL DISHWASHERS UNIT DIMENSIONS U.S. Height (Adjustable)* Width 34-3/8˝ to 36-1/2˝ 24˝ Depth (Includes high loop) 22-7/8˝ DepthW/handle 24-7/8˝ (D5634XXLHS, D5654XXLHS, D5894XXLHS) Depth W/Door Open 49-1/2˝ Weight 110 Ib Metric 873 mm to 927 mm 610 mm 581 mm 632 mm 1257 mm 50 kg Technical Data Electricity 120V, 60Hz, 15 amp Water pressure 4.2 - 140 psi, 0.03-1.0 MPa, 0.3-10 Bar Heating element 1200 watt Max loading 1300 watt * Total height can be reduced by 1/2˝ (13 mm) by removing upper trim, and lowering side trim (2). 24" 610 mm 24-7/8"; 632 mm D5634XXLHS, D5654XXLHS, D5894XXLHS 22-7/8" 581 mm 49-1/2" 1257 mm *34-3/8" to 36-1/2" *873 mm to 927 mm 5-3/8" to 7-3/8" 137 mm to 187 mm 2" 50 mm PREPARING THE LOCATION Cutout Dimensions U.S. Height 34-3/8˝ to 36-1/2˝ Width 24˝ Depth 24˝ Metric 873 to 927 mm 610 mm 610 mm The best place for your dishwasher is in the kitchen near the sink. This makes it easier to connect the water and drain supply lines. A built-in dishwasher must be enclosed on the top, both sides and the back. The power-supply receptacle for the appliance shall be installed in a cabinet or on a wall adjacent to the undercounter space in whitch the appliance is to be installed. The electrical and water supplies should enter through the area indicated by the shading on the illustration at right. Preferably, they should come through the right side of the machine. The access hole must be round and smooth and no bigger than 1-1/2˝ (38 mm) in diameter. If the partition is metal, it needs to be covered with an edge protector. Use caution when the appliance is installed or removed, to reduce the likelihood of damage to the power-supply cord. Door 2-7/8" 73 mm 3-3/8" 86 mm 9" 229 mm 34-3/8" to 36-1/2" minimum 873-927 mm 2" mm 5 1 4" mm 102 24" mm 5-3/8" 136 mm 24" 610 mm 610 4 CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM