Asko D5636XLHS/TH Installation instructions EN - Page 5

ADA AND XL DISHWASHERS UNIT DIMENSIONS Height (Adjustable)* Width Depth (Includes high loop) DepthW/handle (D5634ADAHS, D5624XLCS, D5634XLHS, D5638XLHS, D5644XLCS) Depth W/Door Open Weight U.S. 32-1/4˝ to 34˝ 24˝ 22-7/8˝ 24-7/8˝ 48-3/8˝ 108 Ib Metric 819 mm to 864 mm 610 mm 581 mm 632 mm 1229 mm 49 kg Technical Data Electricity 120V, 60Hz, 15 amp Water pressure 4.2 - 140 psi, 0.03-1.0 MPa, 0.3-10 Bar Heating element 1200 watt Max loading 1300 watt * 32-1/4˝ (819 mm) height requires removal of top trim, and lowering side trim (2). 24" 610 mm 24-7/8"; 632 mm DepthW/handle 22-7/8"; 581 mm 48-3/8" 1229 mm 32-1/4"* to 34" 819* mm to 864 mm 5-3/8" to 8-1/8" 137 mm to 206 mm 2" 50 mm Door 2-7/8" 73 mm 3-3/8" 86 mm 9" 229 mm PREPARING THE LOCATION Cutout Dimensions U.S. Height *32-1/4˝ to 34˝ Width 24˝ Depth 24˝ Metric 819 to 864 mm 610 mm 610 mm The best place for your dishwasher is in the kitchen near the sink. This makes it easier to connect the water and drain supply lines. A built-in dishwasher must be enclosed on the top, both sides and the back. The power-supply receptacle for the appliance shall be installed in a cabinet or on a wall adjacent to the undercounter space in whitch the appliance is to be installed. The electrical and water supplies should enter through the area indicated by the shading on the illustration at right. Preferably, they should come through the right side of the machine. The access hole must be round and smooth and no bigger than 1-1/2˝ (38 mm) in diameter. If the partition is metal, it needs to be covered with an edge protector. Use caution when the appliance is installed or removed, to reduce the likelihood of damage to the power-supply cord. 610 24" mm 102 4" mm 5 1 2" mm 5-3/8" 136 mm 24" 610 mm * 32-1/4˝ (819 mm) height requires removal of top trim, and lowering side trim (2). *32-1/4" to 34" minimum *819-864 mm CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM 5