Asko DFI664XXL Use and Care Guide - Page 15
Unblocking the drain pump
View all Asko DFI664XXL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Unblocking the drain pump If the dishwasher still contains water after the program has finished, something may be blocking the drain pump. Such items are easily removed. 1 Turn off the machine using the main power switch and unplug it from the power outlet. 2 Remove the coarse filter and the fine filter. 3 Scoop out the water from the dishwasher tub. 4 In order to inspect the drain pump, remove the colored stop on the right in the bottom drain. 5 Turn the pump wheel located behind the drain pump stop by hand. Carefully remove any items. 6 Replace the drain pump stop along with the fine and coarse filters. 7 Plug the machine in again. If the dishwasher still does not start and a whirring sound is heard, the overflow protection has been triggered. • Shut off the water. • Unplug the unit from the power outlet. • Call the Customer Care Center. Drain pump stop NOTE! Do not forget to replace the drain pump stop. 15