Asko T701 User manual Use & Care Guide EN - Page 23

Cleaning The Condenser, T721 And T781, Cleaning, Cleaning The F, The F, The Fan

Page 23 highlights

ENGLISH CLEANING THE FAN The fan should be cleaned at least once a year. If you have pets, you should clean it more often. To clean the fan, follow the steps below: 1. Turn off the main power to the machine. 2. Remove the two 20-torx screws on the bottom of the front panel then grasp the bottom of the panel and pull it forward and down. 3. Unscrew the two 10-torx safety screws (A) on the bottom of the fan cover and fold out the four tabs (B). B A B B B A 4. Remove the fan cover. CLEANING THE CONDENSERT721 AND T781 The condenser should be cleaned on a regular basis, preferably monthly. If you have pets, you should probably clean it more often. To clean the condenser, follow the steps below: 1. Turn off the main power to the machine. 2. Remove the two 20-torx screws on the bottom of the front panel then grasp the bottom of the panel and pull it forward and down. 3. Turn the levers on the condenser cover counterclockwise to release it then pull it down. 4. Pull out the condenser. 5. Hold the fan in place while you unscrew the nut. 6. Pull out the fan and clean it with a brush and water. 7. Replace the fan and screw the nut securely. 8. Replace the fan cover and fold the lugs back into place. Replace the safety screws. 9. Replace the front panel. 10. Turn back on the main power. 5. Spray the filter with warm water until all of the lint is removed. WARNING! Do not put the condenser into a dishwasher. Do not use any sharp metal objects or a wire brush to clean the condenser. Also, do not poke anything between the fins. 6. Make sure the side marked UPP UP OBEN "UP" does face up and carefully replace the condenser into the unit. 7. Close the condenser cover. 8. Replace the front panel. 2 2 2 2 9. Turn back on the main power. Page 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

Page 23
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
CLEANING THE CONDENSER-
CLEANING THE CONDENSER-
CLEANING THE CONDENSER-
CLEANING THE CONDENSER-
CLEANING THE CONDENSER-
T721 AND T781
T721 AND T781
T721 AND T781
T721 AND T781
T721 AND T781
The condenser should be cleaned on a regular basis,
preferably monthly. If you have pets, you should probably
clean it more often. To clean the condenser, follow the
steps below:
1.
Turn off the main power to the machine.
2. Remove the two 20-torx
screws on the bottom of
the front panel then grasp
the bottom of the panel and
pull it forward and down.
3. Turn
the levers on the
condenser cover counter-
clockwise to release it then pull
it down.
4.
Pull out the condenser.
5. Spray the filter with warm
water until all of the lint is
removed.
6. Make sure the side marked
“UP” does face up and carefully
replace the condenser into the
unit.
7.
Close the condenser cover.
8.
Replace the front panel.
9.
Turn back on the main power.
WARNING!
Do not put the condenser
into a dishwasher. Do not
use any sharp metal objects or
a wire brush to clean the
condenser. Also, do not poke
anything between the fins.
1.
Turn off the main power to the machine.
2. Remove the two 20-torx
screws on the bottom of
the front panel then grasp
the bottom of the panel and
pull it forward and down.
3.
Unscrew the two 10-torx safety
screws (A) on the bottom of the
fan cover and fold out the four
tabs (B).
4.
Remove the fan cover.
5.
Hold the fan in place while you
unscrew the nut.
6. Pull out the fan and clean it
with a brush and water.
7.
Replace the fan and screw the
nut securely.
8.
Replace the fan cover and fold
the lugs back into place.
Replace the safety screws.
9.
Replace the front panel.
10. Turn
back on the main power.
2
2
A
B
B
B
B
A
UPP
UP
OBEN
2
2
CLEANING
CLEANING
CLEANING
CLEANING
CLEANING THE F
THE F
THE F
THE F
THE FAN
AN
AN
AN
AN
The fan should be cleaned at least once a year. If you
have pets, you should clean it more often. To clean the
fan, follow the steps below: