Asko W4114CW Installation Instructions English - Page 6

Clearances around the washing machine min. 50 mm (2") min. 50 mm (2") min. 50 mm (2") Built-in installation ASKO washers can be installed beneath a cabinet or worktop with a height of 34" to 35" (900 to 950 mm) or in a closet. There must be a gap of about ½" (12 mm) all around the machine, including between the rear edge of the machine's top panel and the back wall. The opening width must be at least 24½" (622 mm). Space must also be available for the fill and drain hoses. See the illustration below for measurements and positions. Opening the washing machine door (top view) 1057 mm (41.61") 376 mm (14.80") 622 mm If the drain outlet is higher than 24" (610 mm), the connections will need to be recessed. 110° Stacked installation ASKO washers should never be stacked on a counter or a dryer. You can, however, stack an ASKO dryer on an ASKO washer. Refer to your Dryer Use and Care Guide for instructions on how to do this. 6 Customer Care Center, 1-800-898-1879, www.askona.com