Asus 90-IDA002A01-01PZ User Guide - Page 51
DTIM Interval 1-255
View all Asus 90-IDA002A01-01PZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Set AP Isolated - Selecting Yes to prevent wireless client from communicating with each other. Data Rate (Mbps) - This field allows you to specify the transmission rate. Leave on "Auto" to maximize performance versus distance. Basic Rate Set - This field indicates the basic rates that wireless clients must support. Use "1 & 2 Mbps" only when backward compatibility is needed for some older wireless LAN cards with a maximum bit rate of 2Mbps. Fragmentation Threshold (256-2346) - Fragmentation is used to divide 802.11 frames into smaller pieces (fragments) that are sent separately to the destination. Set a specific packet size threshold to enable fragmentation. If there is an excessive number of collisions on the WLAN, experiment with different fragmentation values to increase the reliability of frame transmissions. The default value (2346) is recommended for normal use. RTS Threshold (0-2347) - The RTS/CTS (Request to Send/Clear to Send) function is used to minimize collisions among wireless stations. When RTS/CTS is enabled, the router refrains from sending a data frame until another RTS/CTS handshake is completed. Set a specific packet size threshold to enable RTS/CTS. The default value (2347) is recommended. DTIM Interval (1-255) - DTIM (Delivery Traffic Indication Message) is a wireless message used to inform clients in Power Saving Mode when the system should wake up to receive broadcast and multicast messages. Type the time interval in which the system will broadcast a DTIM for clients in Power Saving Mode. The default value (3) is recommended Beacon Interval (1-65535) - This field indicates the time interval in milliseconds that a system broadcast packet, or beacon, is sent to synchronize the wireless network. The default value (100 milliseconds) is recommended. Enable Frame Bursting? - This field allows you to enable frame-bursting mode to improve performance with wireless clients that also support frame-bursting. Radio Power - Radio Power can be set between 1 to 84 but the default value is recommended. Enable WMM - This field allows you to enable WMM to improve multimedia transmission Enable WMM No-Acknowledgement - This field allows you to enable WMM NoAcknowledgement ASUS WL-330gE Portable Wireless Access Point 4-21