Asus AK34 AK34 Chassis User Guide - Page 30
Connect a 4-pin power plug
View all Asus AK34 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
6. Connect one end of a 40-pin IDE cable to the IDE connector on the drive. Connect the other end to an availble IDE connector on the motherboard. 6 Each drive tray has a designated IDE cable to ensure better air flow and cable placement. Make sure to connect the appropriate cable plug to each drive. 7. Connect a 4-pin power plug to the drive power connector. 7 8. Repeat steps 1 to 7 to install other hard disk drives. 8 2-14 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-14
6.
Connect one end of a 40-pin
IDE cable to the IDE connector
on the drive. Connect the other
end to an availble IDE
connector on the motherboard.
6
7
Each drive tray has a designated IDE cable to ensure better air flow
and cable placement. Make sure to connect the appropriate cable plug
to each drive.
7.
Connect a 4-pin power plug to
the drive power connector.
8.
Repeat steps 1 to 7 to install
other hard disk drives.
8