Asus CUSL2-C BP CUSL2-C BP User Manual - Page 20

H/w Setup

Get Asus CUSL2-C BP PDF manuals and user guides View all Asus CUSL2-C BP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP Motherboard Feature Settings The motherboard's onboard functions are either adjusted through jumpers or DIP switches. When using DIP switches, the white block represents the switch's position. The example below shows all the switches in the OFF position. DSW ON 12345 ® CUSL2-C BP CUSL2-C BP DIP Switches ON OFF 1. Frequency Selection 2. Frequency Selection 3. Frequency Selection 4. Frequency Selection 5. Frequency Selection. 1) JumperFree™ Mode (JEN) This jumper allows you to enable or disable the JumperFree™ mode. The JumperFree™ mode allows processor settings to be made through the BIOS setup (see 4.4 Advanced Menu). NOTE: In JumperFree™ mode, all dip switches must be set to OFF. Setting JEN Disable (Jumper) [1-2] Enable (JumperFree) [2-3] (default) DSW ON 12345 ® CUSL2-C BP CUSL2-C BP JumperFree™ Mode Setting OFF JEN Disable Enable(default) 12 23 20 ASUS CUSL2-C Black PearlUser's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
ASUS CUSL2-C
Black Pearl
User’s Manual
3. HARDWARE SETUP
20
Motherboard Settings
3. H/W SETUP
Motherboard Feature Settings
The motherboard’s onboard functions are either adjusted through jumpers or DIP
switches. When using DIP switches, the white block represents the switch’s posi-
tion. The example below shows all the switches in the OFF position.
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
5. Frequency Selection.
CUSL2-C BP DIP Switches
DSW
ON
OFF
ON
12345
CUSL2-C BP
1)
JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see
4.4 Advanced Menu
).
NOTE:
In JumperFree™ mode, all dip switches must be set to OFF.
Setting
JEN
Disable (Jumper)
[1-2]
Enable (JumperFree)
[2-3] (default)
CUSL2-C BP
CUSL2-C BP JumperFree™
Mode Setting
JEN
DSW
ON
12345
OFF
Disable
12
Enable(default)
23