Asus DSBF-DE BULK User Guide - Page 21

2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity. • Hold components by the edges to avoid touching the ICs on them. • Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component. • Before you install or remove any component, ensure that the power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. ® SB_PWR1 DSBF-DE Series Onboard LED ON Standby Power OFF Powered Off If the ATX12V2 connector is not connected, the REAR_FAN1/2, FRNT_FAN1/2/3/4, and FBD_FAN1 will not work. ® LED1 DSBF-DE Series SAS LED ON Standby Power OFF Powered Off This LED is for DSBF-DE/SAS model only, indicating that if the LSI SAS1068 chipset is working normally. ASUS DSBF-DE Series 2-