Asus DSBF-DE BULK User Guide - Page 51
Onboard storage setting 3-pin SAS_EN1, LAN bandwidth setting 3-pin LAN_BW1
View all Asus DSBF-DE BULK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
6. Onboard storage setting (3-pin SAS_EN1) (for DSBF-DE/SAS model only) This jumper allows you to select the onboard storage to use. Place the jumper caps on pins 1-2 if you want to use the Intel® 6321ESB‑supported Ultra DMA/ Serial ATA II devices (default); otherwise, place the jumper caps on pins 2-3 to use Serial Attached SCSI (SAS) storage device supported by the LSI1068 PCI-X SAS controller. ® DSBF-DE Series SAS setting SAS_EN1 12 23 Enable (Default) Disable 7. LAN bandwidth setting (3-pin LAN_BW1) This jumper allows you to set the LAN bandwidth setting for more efficient IP load distribution. ® LAN_BW1 12 23 Balanced mode (Default) DSBF-DE Series LAN bandwidth setting Centric mode Balance Mode: It's 1 x 8 link between MCH and ESB2; LAN Centrical Mode: It's 2 x 4 link between MCH and ESB2. ASUS DSBF-DE Series 2-31