Asus ES5000 User Manual - Page 15
Double Feed, Mis-Feed, Skewed Fold
View all Asus ES5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2) Double Feed 2.1) Clean the Pickup rollers and pad with an alcoholic solution(In case the problem persists, then go to 2.2) Pressure Sealer ES-5000 2.2) Slide In-feed tray tension adjusters upwards (Manufacturer's default position: middle). Both tension adjusters must be in the same position as shown in the picture on the right(In case the problem persists, then go to 2.3) 2.3) Replace in-feed roller and or Separator(Pad Base) 3) Mis-Feed 3.1) Clean In-feed roller and pad with an alcoholic solution(In case the problem persists, then go to 3.2) 3.2) Move the In-feed tray tension adjusters downwards until miss-feeding is resolved as shown in the picture on the right(in case of no improvement, then go to 3.3) 3.3) Replace in-feed roller and/or Separator (Pad Base) 4) Skewed Fold 4.1) Clean the In-feed roller and pad with an alcoholic solution 4.2) Check to make sure the side guides are not bent in any ways 4.3) Insure that there shouldn't be too much gap between paper and the side guides as shown in the picture below 4.4) On adjustment screws are set correctly 4.5) Insure that the side guides are right up against the edge of the form but not compressing the form 4.6) Look for foreign materials in the folding drum assembly 15