Asus ESC4000 FDR G2 User Guide - Page 144

Intel, Rapid Storage Technology, enterprise SCU/SATA Option ROM, Utility

Get Asus ESC4000 FDR G2 PDF manuals and user guides View all Asus ESC4000 FDR G2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 144 highlights

6.3 Intel® Rapid Storage Technology enterprise SCU/SATA Option ROM Utility The Intel® Rapid Storage Technology enterprise SCU / SATA Option ROM utility allows you to create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge. You can create RAID mode by use of onboard AHCI SATA ports. Also, when installed optional ASRK module, you can use onboard scu SAS ports to create RAID mode. To use onboard SATA ports: 1. Install all the Serial ATA hard disk drives. 2. Turning on the system. During POST, press,Del. to enter BIOS. Go to Advanced Menu > PCH SATA Configuration > SATA Mode, then press . 3. Set SATA Mode to RAID Mode and save, then reboot system. 4. During POST, press to display the utility main menu. To use SCU SATA ports: 1. Install all the SATA hard disk drives. 2. Turning on the system. During POST, press to enter BIOS. Go to Advanced Menu > PCH SCU SAS Configuration, then press . 3. Confirm all the SAS hard disk drives you installed are correctly displayed, then reboot system. 4. During POST, press to display the utility main menu. 6-24 Chapter 6: RAID configuration

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
6-24
Chapter 6: RAID configuration
6.3
Intel
®
Rapid Storage Technology
enterprise SCU/SATA Option ROM
Utility
The Intel
®
Rapid Storage Technology enterprise SCU / SATA Option ROM utility
allows you to create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s)
from Serial ATA hard disk drives that are connected to the Serial ATA connectors
supported by the Southbridge.
You can create RAID mode by use of onboard AHCI SATA ports. Also, when
installed optional ASRK module, you can use onboard scu SAS ports to create
RAID mode.
To use onboard SATA
ports:
1.
Install all the Serial ATA hard disk drives.
2.
Turning on the system. During POST, press,Del. to enter BIOS. Go to
Advanced Menu
>
PCH SATA Configuration
>
SATA Mode
, then press
<Enter>.
3.
Set
SATA Mode
to
RAID Mode
and save, then reboot system.
4.
During POST, press <Ctrl+I> to display the utility main menu.
To use SCU SATA
ports:
1.
Install all the SATA hard disk drives.
2.
Turning on the system. During POST, press <Del> to enter BIOS. Go to
Advanced Menu
>
PCH SCU SAS Configuration
, then press <Enter>.
3.
Confirm all the SAS hard disk drives you installed are correctly displayed,
then reboot system.
4.
During POST, press <Ctrl+I> to display the utility main menu.