Asus ESC4000 FDR G2 Cache Vault Accessory Kit Quick Start Guide - Page 7
Installing the kit on ESC4000 G2 GPU server system
View all Asus ESC4000 FDR G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. Align the three screw holes on the LSI® steel CVPM clip to the three screw holes on the bracket, and secure the clip with the bundled screws (4). 3. Install the Cache Vault Power Module to the clip and connect the 42'' cable extender to it. 4. Connect the other end of the 42'' cable extender to the Cache Vault Flash Module which is installed on the PIKE 2208 card. 5. Install the PIKE 2208 card to the expansion slot, and then install the bracket to the system as shown. Wrap the excessive part of the cable and place it into the gap beside the PIKE 2208 card. PIKE 2208 card For more details on how to uninstall the riser card bracket, refer to the user manual that came with your server system. Installing the kit on ESC4000 G2 GPU server system 1. Align the two screws on the side of the steel CVPM holder installed with the Cache Vault Power Module to the screw holes of the full-height steel bracket. Secure the holder assembly with the bundled screws (3). Cache Vault Accessory Kit