Asus L1N64-SLI WS L1N64 WS Pro English user manual E3014 - Page 83

CAS Latency (CL) [Auto] Configuration options: [Auto] [3.0] [4.0] [5.0] [6.0] TRCD [Auto] Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] TRP [Auto] Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] TRAS [Auto] Configuration options: [Auto] [5 CLK] [6 CLK] [7 CLK] [8 CLK]... [18 CLK] 1T/2T Memory Timing [2T] Configuration options: [Auto] [1T] [2T] MCT Timing Mode [Auto] Allows you to manually configure the MCT Timing Mode parameters. Configuration options: [Auto] [Manual] The following items appear when the MCT Timing Mode item is set to [Manual]. TRRD [Auto] Configuration options: [Auto] [2T] [3T] [4T] [5T] TRC [Auto] Configuration options: [Auto] [11T] [12T] [13T]...[25T] [26T] Bank Interleaving [Auto] Sets whether to allow memory accesses to be spread out over BANKS on the same node or across nodes, decreasing access contention. Configuration options: [Disabled] [Auto] Node Interleaving [Auto] Sets whether to allow memory accesses to be spread out over NODES on the same node or across nodes, decreasing access contention. Configuration options: [Disabled] [Auto] DQS Signal Training Control [Disabled] Enables or disable the DQS Signal Timing Training control. Configuration options: [Enabled] [Disabled] MemClk Tristate C3/ATLVID [Disabled] Enables or disable the MemClk Tri-Stating during C3 and Alt VID. Configuration options: [Enabled] [Disabled] CS Sparing Enable [Disabled] Configuration options: [Enabled] [Disabled] Memory Hole Remapping [Enabled] Enables or disable the memory remapping around the memory hole. Configuration options: [Enabled] [Disabled] Power Down Control [Disabled] Allows DIMMs to enter the power down mode by deasserting the clock enable signal when DIMMs are not in use. Configuration options: [Auto ] [Disabled] ASUS L1N64-SLI WS 4-23