Asus M2N GREEN M2N DH English Edition User's Manual - Page 47
Serial ATA connectors, pin SATA1 [red], SATA2 [red], SATA3 [red], SATA4 [red], Serial port connector
View all Asus M2N GREEN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
3. Serial ATA connectors (7-pin SATA1 [red], SATA2 [red], SATA3 [red], SATA4 [red]) These connectors are for the Serial ATA signal cables for Serial ATA 3.0 Gb/s hard disk and optical disk drives. The Serial ATA 3.0 Gb/s is backward compatible with Serial ATA 1.5 Gb/s specification. If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 0+1, RAID 5, or JBOD configuration through the onboard NVIDIA® MediaShield™ controller. R SATA2 SATA1 SATA4 SATA3 GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXP2 RSATA_RXN2 GND GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXP1 RSATA_RXN1 GND GND RSATA_TXP4 RSATA_TXN4 GND RSATA_RXP4 RSATA_RXN4 GND GND RSATA_TXP3 RSATA_TXN3 GND RSATA_RXP3 RSATA_RXN3 GND M2N/M2N DH SATA Connectors The RAID function of these connectors is set to [Disabled] by default. If you intend to create a Serial ATA RAID set using these connectors, enable the nVidia RAID Function item in the BIOS. See section "4.3.4 IDE Configuration" for details. 4. Serial port connector (10-1 pin COM1) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. COM1 R PIN1 M2N/M2N DH COM Port Connector The COM module is purchased separately. ASUS M2N / M2N DH 2-25