Asus M2N GREEN M2N DH English Edition User's Manual - Page 83

The following items appear when the Memclock Mode is set to Limit or manual. Memclock Value [400 MHz] Sets the memory clock mode limit. This item appears only when the Memory Mode item is set to Limit. Configuration options: [400 MHz] [533 MHz] [667 MHz] [800 MHz] MCT Timing Mode [Auto] Sets the MCT Timing mode. Configuration options: [Auto] [Manual] The following item appears when the MCT Timing Mode item is set to [Manual]. CAS Latency (CL) [Auto] Configuration options: [Auto] [3.0] [4.0] [5.0] [6.0] TRAS [Auto] Configuration options: [Auto] [5 CLK] [6 CLK]... [18 CLK] TRP [Auto] Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] TRCD [Auto] Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] TRRD [Auto] Configuration options: [Auto] [2T] [3T] [4T] [5T] TRC [Auto] Configuration options: [Auto] [11T] [12T] [13T]...[25T] Bank Interleaving [Auto] Sets the bank interleaving feature. Configuration options: [Auto] [Disabled] The Bank Interleaving item appears only when you use a memmory that supports this function. Enable Clock to All DIMMs [Disabled] Enables or disables the unused clocks to DIMMs, even if the memory slots are not populated. Configuration options: [Enabled] [Disabled] ASUS M2N / M2N DH 4-23