Asus M2N-Plus SLI Vista Motherboard Installation Guide - Page 50
CPU, chassis, and power fan connectors, pin CPU_FAN, 3-pin PWR_FAN, M2N-PLUS SLI Fan connectors
View all Asus M2N-Plus SLI Vista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Connect the right-angle side of SATA signal cable to SATA device. Or you may connect the right-angle side of SATA cable to the onboard SATA port to avoid mechanical conflict with huge graphics cards. right angle side 4. CPU, chassis, and power fan connectors (4-pin CPU_FAN, 3-pin PWR_FAN, 3-pin CHA_FAN) The fan connectors support cooling fans of 350 mA~2000 mA (24 W max.) or a total of 1 A~7 A (84 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! CPU_FAN GND CPU FAN PWR CPU FAN IN CPU FAN PWM M2N-PLUS SLI ® PWR_FAN GND +12V Rotation CHA_FAN GND +12V Rotation M2N-PLUS SLI Fan connectors • Only the CPU_FAN and CHA_FAN connectors support the ASUS Q FAN2 feature. • If you install two VGA cards, we recommend that you plug the rear chassis fan cable to the motherboard connector labled CHA_FAN for better themal environment. 2-26 Chapter 2: Hardware information