Asus M2NL M2N-L Series User's manual English Edition - Page 97
Creating a RAID Volume
View all Asus M2NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
5.5.2 Creating a RAID Volume To create a RAID set: 1. From the Define a New Array menu, select RAID Mode, then press . A pop-up menu appears. Use the up or down arrow keys to select a RAID mode , then press . You can select either Mirrored, Striped, Spanned, Striped Mirror, or RAID 5. Mirrored Striped Spanned Striped Mirror RAID 5 • The RAID mode is set to Mirrored by default. • Not all RAID modes are supported on all platforms. (If the server only has two HDDs, it only supports RAID 0 and RAID 1 mode.) 2. Press to select the Stripe Block option, then press . The following submenu appears: The available stripe size values range from 4KB to 128KB. The default stripe size is optimal (64KB). You must choose the stripe size value based on the projected drive usage. For low disk usage, select 4 KB/16 KB. For typical disk usage, select 64 KB. Select 128KB for performance disk usage. 4K ↑ 8K 16K 32K 64K 128K ↓ Optimal For server systems, we recommend using a lower array block size. For multimedia computer systems used mainly for audio and video editing, we recommend a higher array block size for optimum performance. 3. Press to move to the Free Disks section. Highlight the hard disk drives that you want to add in the RAID set, then press the right arrow key to select. The selected hard disk drives appear in the Array Disks section. Repeat the process until all desired hard disk drives are added. ASUS M2N-L 5-11