Asus M2V GREEN Motherboard Installation Guide - Page 66
Sets the 2T mode. Configuration options: [Auto] [Disabled] [Enable]
View all Asus M2V GREEN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Memclock Mode [Auto] Allows you to set the memory clock mode.Set by the code using [Auto] or select [Manual] to set using one of the standard values. Configuration options: [Auto] [Manual] [Limit] CAS Latency (CL) [Auto] Configuration options: [Auto] [3.0] [4.0] [5.0] [6.0] TRCD [Auto] Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] TRP [Auto] Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] TRAS [Auto] Configuration options: [Auto] [5 CLK] [6 CLK]... [12 CLK] 2T Mode [Auto] Sets the 2T mode. Configuration options: [Auto] [Disabled] [Enable] MCT Timing Mode [Auto] Sets the MCT Timing mode. Configuration options: [Auto] [Manual] The following item appears when the MCT Time Mode item is set to [Manual]. TRRD [Auto] Configuration options: [Auto] [2T] [3T] [4T] [5T] TRC [Auto] Configuration options: [Auto] [11T] [12T] ... [18T] Bank Interleacving [Auto] Sets whether to allow memory accesses to be spread out over BANKS on the same node or across nodes, decreasing access contention. Configuration options: [Disabled] [Auto] Enable Clock to All DIMMs [Disabled] Allows you to enable or disable clock to all DIMMs. Configuration options: [Disabled] [Enabled] MemClk Tristate C3/ATLVID [Disabled] Allows you to enable or disable the MemCLK Tri-Stating During C3 and Alt VID. Configuration options: [Disabled] [Enabled] Memory Hole Remapping [Disabled] Allows you to enable or disable Memory Remapping around the memory hole. Configuration options: [Disabled] [Enabled] 2-24 Chapter 2: BIOS Setup