Asus M3A GREEN User Manual - Page 76

Onboard Devices Configuration

Page 76 highlights

2.4.6 Onboard Devices Configuration Advanced Onboard Devices Configuraiton Serial Port1 Address [3F8/IRQ4] HD Audio Azalia Device [Auto] Front Panel Support Type [HD Audio] Onboard Attansic L1 Lan [Enabled] Onboard Attansic L1 LAN Boot [Disabled] Primary Display Adapter [PCI-E] Allows BIOS to Select Serial Port1 Base Addresses. Serial Port1 Address [3F8/IRQ4] Allows you to select the Serial Port1 base address. Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] HD Audio Azalia Device [Auto] Allows you to enable or disable the High Definition Audio. The following item appears only when you set this item to [Auto]. Configuration options: [Auto] [Disabled] Front Panel Support Type [HD Audio] Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or high-definition audio depending on the audio standard that the front panel audio module supports. Configuration options: [AC97] [HD Audio] Onboard Attansic L1 Lan [Enabled] Configuration options: [Enable] [Disabled] Onboard Attansic L1 Lan Boot Rom [Disabled] This item appears only when you enable the previous item. Configuration options: [Enable] [Disabled] Primary Display Adapter [PCI-E] Allows you to select which graphics controller to use as the primary boot device. Configuration options: [PCI-E] [PCI] [Onboard] 2-28 Chapter 2: BIOS setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106

2-28
Chapter 2: BIOS setup
2.4.6
Onboard Devices Configuration
Allows BIOS to Select
Serial Port1 Base
Addresses.
Onboard Devices Configuraiton
Serial Port1 Address
[3F8/IRQ4]
HD Audio Azalia Device
[Auto]
Front Panel Support Type
[HD Audio]
Onboard Attansic L1 Lan
[Enabled]
Onboard Attansic L1 LAN Boot [Disabled]
Primary Display Adapter
[PCI-E]
Advanced
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
HD Audio Azalia Device [Auto]
Allows you to enable or disable the High Definition Audio. The following item
appears only when you set this item to [Auto].
Configuration options: [Auto] [Disabled]
Front Panel Support Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or
high-definition audio depending on the audio standard that the front panel audio
module supports.
Configuration options: [AC97] [HD Audio]
Onboard Attansic L1 Lan [Enabled]
Configuration options: [Enable] [Disabled]
Onboard Attansic L1 Lan Boot Rom [Disabled]
This item appears only when you enable the previous item.
Configuration options: [Enable] [Disabled]
Primary Display Adapter [PCI-E]
Allows you to select which graphics controller to use as the primary boot device.
Configuration options: [PCI-E] [PCI] [Onboard]