Asus M4A78L-M User Manual - Page 54

Cool 'n' Quiet [Enabled], C1E Configuration [Disabled], NorthBridge Configuration, Memory Configuration - best memory

Page 54 highlights

Cool 'n' Quiet [Enabled] Enables or disables the AMD® Cool 'n' Quiet technology. Configuration options: [Enabled] [Disabled] CPU Prefetching [Enabled] Enables or disables CPU prefetching. Configuration options: [Enabled] [Disabled] C1E Configuration [Disabled] Enables or disables the CPU Enhanced Halt (C1E) function, a CPU power-saving function in system halt state. When this item is enabled, the CPU core frequency and voltage will be reduced during the system halt state to decrease power consumption. Configuration options: [Disabled] [Enabled] Advanced Clock Calibration [Disabled] Adjusts the processor's overclocking capability. When this item is set to [Auto], the BIOS automatically adjusts this function. When this item is set to [All Cores], the processor has the best overclocking performance. When this item is set to [Per Core], the processor's overclocking capability is enhanced. Configuration options: [Disabled] [Auto] [All Cores] [Per Core] 2.4.3 Chipset NorthBridge Configuration Memory Configuration Bank Interleaving [Auto] Allows you to enable the bank memory interleaving. Configuration options: [Disabled] [Auto] Channel Interleaving [XOR of Address bit] Allows you to enable the channel memory interleaving. Configuration options: [Disabled] [Address bits 6] [Address bits 12] [XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]] Enable Clock to All DIMMs [Disabled] Enables unused Clocks to DIMMs even though memory slots are not populated. Configuration options: [Disabled] [Enabled] MemClk Tristate C3/ATLVID [Disabled] Enables or disables MemClk Tri-Stating during C3 and Alt VID. Configuration options: [Disabled] [Enabled] Memory Hole Remapping [Enabled] Enables or disables memory remapping around memory hole. Configuration options: [Disabled] [Enabled] DCT Unganged Mode [Always] Selects the unganged DRAM mode (64-bit width). Configuration options: [Auto] [Always] Power Down Enable [Disabled] Enables or disables DDR power down mode. Configuration options: [Disabled] [Enabled] 2-12 Chapter 2: BIOS information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

2-12
Chapter 2: BIOS information
Cool ‘n’ Quiet [Enabled]
Enables or disables the AMD
®
Cool ‘n’ Quiet technology. Configuration options: [Enabled]
[Disabled]
CPU Prefetching [Enabled]
Enables or disables CPU prefetching. Configuration options: [Enabled] [Disabled]
C1E Configuration [Disabled]
Enables or disables the CPU Enhanced Halt (C1E) function, a CPU power-saving function
in system halt state. When this item is enabled, the CPU core frequency and voltage will be
reduced during the system halt state to decrease power consumption.
Configuration options: [Disabled] [Enabled]
Advanced Clock Calibration [Disabled]
Adjusts the processor’s overclocking capability. When this item is set to
[Auto]
, the BIOS
automatically adjusts this function. When this item is set to
[All Cores]
, the processor has
the best overclocking performance. When this item is set to
[Per Core]
, the processor’s
overclocking capability is enhanced. Configuration options: [Disabled] [Auto] [All Cores]
[Per Core]
2.4.3
Chipset
NorthBridge Configuration
Memory Configuration
Bank Interleaving [Auto]
Allows you to enable the bank memory interleaving. Configuration options: [Disabled]
[Auto]
Channel Interleaving [XOR of Address bit]
Allows you to enable the channel memory interleaving.
Configuration options: [Disabled] [Address bits 6] [Address bits 12]
[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]]
Enable Clock to All DIMMs [Disabled]
Enables unused Clocks to DIMMs even though memory slots are not populated.
Configuration options: [Disabled] [Enabled]
MemClk Tristate C3/ATLVID [Disabled]
Enables or disables MemClk Tri-Stating during C3 and Alt VID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Enables or disables memory remapping around memory hole.
Configuration options: [Disabled] [Enabled]
DCT Unganged Mode [Always]
Selects the unganged DRAM mode (64-bit width). Configuration options: [Auto]
[Always]
Power Down Enable [Disabled]
Enables or disables DDR power down mode. Configuration options: [Disabled]
[Enabled]