Asus M4N72-E User Manual

Asus M4N72-E - Motherboard - ATX Manual

Get Asus M4N72-E - Motherboard - ATX PDF manuals and user guides
UPC - 610839169573
View all Asus M4N72-E manuals
Add to My Manuals
Save this manual to your list of manuals

Asus M4N72-E manual content summary:

  • Asus M4N72-E | User Manual - Page 1
    M4N72-E Motherboard
  • Asus M4N72-E | User Manual - Page 2
    Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY
  • Asus M4N72-E | User Manual - Page 3
    vii About this guide vii M4N72-E specifications summary ix Chapter 1 Product introduction 1.1 Welcome 1-1 1.2 Package contents 1-1 1.3 Special features 1-1 1.3.1 Product highlights 1-1 1.3.2 Innovative ASUS features 1-2 1.4 Before you proceed 1-4 1.5 Motherboard overview
  • Asus M4N72-E | User Manual - Page 4
    .2 Support DVD information 1-32 Chapter 2 BIOS information 2.1 Managing and updating your BIOS 2-1 2.1.1 Creating a bootable floppy disk 2-1 2.1.2 ASUS Update utility 2-2 2.1.3 ASUS EZ Flash 2 utility 2-3 2.1.4 AFUDOS utility 2-4 2.1.5 ASUS CrashFree BIOS 2 utility 2-5 2.2 BIOS setup
  • Asus M4N72-E | User Manual - Page 5
    1.8V Voltage [Auto 2-16 2.4.11 CPU/LDT Spread Spectrum [Disabled 2-16 support [Enabled 2-21 2.6.5 APM Configuration 2-22 2.6.6 Hardware Monitor 2-22 2.7 Boot menu 2-24 2.7.1 Boot Device Priority 2-24 2.7.2 Boot Settings Configuration 2-24 2.7.3 Security 2-25 2.8 Tools menu 2-26 2.8.1 ASUS
  • Asus M4N72-E | User Manual - Page 6
    and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there digital apparatus complies with Canadian ICES-003. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper
  • Asus M4N72-E | User Manual - Page 7
    . • If you encounter technical problems with the product, contact a qualified service technician or your retailer. About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts
  • Asus M4N72-E | User Manual - Page 8
    Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task. Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS website provides updated
  • Asus M4N72-E | User Manual - Page 9
    ™ / Sempron™ processors (socket AM2+/AM2) Compatible with Phenom™ II / Athlon™ X4 / Athlon™ X3 / Athlon™ X2 (AM3 CPU) Support 45nm CPU AMD® Cool'n'Quiet™ Technology NVIDIA® nForce® 750a SLI™ Up to 5200 MT/s HyperTransport™ 3.0 interface for AM3 / AM2+ CPU 2000 / 1600 MT/s for AM2 CPU 4 x DIMM, max
  • Asus M4N72-E | User Manual - Page 10
    - ASUS Q-Fan 2 ASUS EZ DIY - ASUS Q-Connector - ASUS CrashFree BIOS 2 - ASUS O.C. Profile - ASUS EZ Flash 2 100% All High-quality Conductive Polymer Capacitors! (5000hrs VRM, over 57 years operation lifespan at 65ºC) ASUS MyLogo 2™ Intelligent overclocking tools: - AI Overclocking (Intelligent CPU
  • Asus M4N72-E | User Manual - Page 11
    connector 1 x CD audio in connector 1 x 24-pin ATX Power connector 1 x 4-pin ATX 12V Power connector 1 x System Panel (Q-Connector) 8 Mb Flash ROM, AMI BIOS, PnP, DMI 2.0, WfM2.0, SM BIOS 2.5, ACPI 2.0, ASUS EZ Flash 2, ASUS CrashFree BIOS 2 Express Gate ASUS PC Probe II ASUS Update Anti-Virus
  • Asus M4N72-E | User Manual - Page 12
    xii
  • Asus M4N72-E | User Manual - Page 13
    panel; Retail version only) ASUS motherboard support DVD User manual If any of the above items is damaged or missing, contact your retailer. 1.3 1.3.1 Special features Product highlights AMD® Phenom™ II / Athlon™ X4 / Athlon™ X3 / Athlon™ X2 processors (AM3 CPU) This motherboard supports AMD® AM3
  • Asus M4N72-E | User Manual - Page 14
    other memory demanding applications. DDR2 1066 is supported by AM3 / AM2+ CPUs only. Refer to www.asus.com for the supported CPU models. 1.3.2 Innovative ASUS features ASUS Power Solution ASUS 8+1 Phase Power Design To fully unleash the next-generation AM3 CPU's potential, ASUS M4N72-E motherboard
  • Asus M4N72-E | User Manual - Page 15
    key. ASUS EZ O.C. TurboV Feel the adrenaline rush of real-time O.C.-now a reality with the ASUS TurboV. This easy O.C. tool allows you to overclock without ASUS Features ASUS Express Gate Taking only 5 seconds to bootup, Express Gate is the one-stop gateway to instant fun! It's a unique motherboard
  • Asus M4N72-E | User Manual - Page 16
    following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. or plugging in any motherboard component. The illustration below shows the location of the onboard LED. 1-4 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 17
    in the image below. 1.5.2 Screw holes Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis. Do not overtighten the screws! Doing so can damage the motherboard. Place this side towards the rear of the chassis. Chapter 1: Product introduction 1-5
  • Asus M4N72-E | User Manual - Page 18
    1.5.3 Motherboard layout 1.5.4 Layout contents Connectors/Jumpers/Slots 1. Keyboard/mouse power (3-pin PS2_USBPW56) 2. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) 3. USB device wake-up (3-pin USBPW1-4, USBPW7-10, USBPW1112) 4. CPU socket AM2+/AM2 5. CPU, Chassis and Power Fan
  • Asus M4N72-E | User Manual - Page 19
    1.6 Central Processing Unit (CPU) The motherboard comes with a CPU socket designed for AMD® AM3 Phenom™ II / Athlon™ X4 / Athlon™ X3 / Athlon™ X2 processors and AM2+ / AM2 Phenom™ X4 / Phenom™ X3 / Athlon™ X2 / Athlon™ / Sempron™ processors. The CPU socket is not compatible with AMD® Opteron™
  • Asus M4N72-E | User Manual - Page 20
    heatsink package. You can also refer to section 1.6.2 Installing the heatsink and fan for instructions. 7. Connect the CPU fan cable to the CPU_FAN connector on the motherboard. Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector
  • Asus M4N72-E | User Manual - Page 21
    with installation instructions for the CPU, heatsink, and the retention mechanism. If the instructions in this section do not match the CPU documentation, in place, connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN. Do not forget to connect the CPU fan connector! Hardware
  • Asus M4N72-E | User Manual - Page 22
    dependent on its SPD. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. • For system stability, use a more efficient memory cooling system to support a full memory load (4 DIMMs) or overclocking condition. 1-10 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 23
    M4N72-E Motherboard Qualified Vendors Lists (QVL) DDR2-1066MHz capability Vendor Part No. Size SS/ Chip DS Brand Chip NO. Timing Dimm (Bios socket Voltage support (Optional • • 2.2-2.3 • • Due to AM3/AM2+ CPU limitation, only one DDR2 1066 DIMM is supported per channel. When four DDR2 1066
  • Asus M4N72-E | User Manual - Page 24
    NT5TU64M8BE-25C NT5TU64M8CE-25D NT5TU128M8CE-AC Timing Dimm (Bios) DIMM socket Voltage support (Optional) A* B* C* ••• 5 ••• 5 2.0 • • • 1.8 • • • 4 2.0 • • 1.8 • • • 1.8 • • • •• 2.3-2.35 • • 2.0 • • • 1.8 • • • •• 5 ••• 5 ••• • 5 ••• 1-12 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 25
    SAMSUNG K4T1G084QQ(ECC) SAMSUNG K4T1G084QQ SAMSUNG K4T2G084QA-HCF7 Heat-Sink Package Timing Dimm (Bios) DIMM socket Voltage support (Optional) A* B* C* • 5 1.8 • • 5 1.8 • • 3-4-4 (800-5- 2.35 • 5-5-15) 5-4-4 1.8 • • • 5 1.80 • • • 5-6-6 (800-5- 1.8 • • • 5-5-15
  • Asus M4N72-E | User Manual - Page 26
    either the yellow slots or the black slots as one pair of Dual-channel memory configuration. • C*: Supports four modules inserted into both the yellow slots and the black slots as two pairs of Dual-channel memory configuration. Visit the ASUS website for the latest QVL. 1-14 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 27
    adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. 1. Press the retaining clips outward to unlock a DDR2 DIMM socket. 2. Align a DIMM on the socket such that the notch on the DIMM matches the break on the
  • Asus M4N72-E | User Manual - Page 28
    x1 slots This motherboard supports PCI Express x1 network cards, SCSI cards, and other cards that comply with the PCI Express specifications. 1.8.5 PCI Express x16 slot This motherboard supports a PCI Express x16 graphics card that complies with the PCI Express specifications. 1-16 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 29
    the CMOS RTC RAM data. After the CMOS clearance, reinstall the battery. • You do not need to clear the RTC when the system hangs due to overclocking. For system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature. Shut down and reboot the system so the BIOS can automatically
  • Asus M4N72-E | User Manual - Page 30
    overvoltage ability, use the BIOS items introduced in 2.4 Ai Tweaker menu first to adjust the desired CPU performance. Ensure that your system functions well under the highest BIOS voltage setting before you , a water-cooling system) to work stably under high voltage settings. 1-18 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 31
    device. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. The USBPW56 jumper is for +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). The USBPW1-4
  • Asus M4N72-E | User Manual - Page 32
    channel, 6-channel, or 8-channel audio configuration. 6. Line In port (light blue). This port connects the tape, CD, DVD player, or other audio sources. 7. Line Out port (lime). This port connects a headphone or a function of the audio ports in 2, 4, 6, or 8-channel configuration. 1-20 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 33
    Audio 2, 4, 6, 8-channel configuration Port Light Blue Lime Pink Orange Black Gray Headset 2-channel Line In Line Out Mic In - - - 4-channel Line In Front Speaker Out Mic In - Rear Speaker Out - 6-channel Line In Front Speaker Out Mic In Center/Subwoofer Rear Speaker Ou - 8-channel Line In
  • Asus M4N72-E | User Manual - Page 34
    the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors. Only the CPU_FAN and CHA_FAN1 connectors support the ASUS Q FAN 2 feature. jumper caps only when you intend to use the chassis intrusion detection feature. 1-22 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 35
    Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. • The ATX 12 V Specification 2.0-compliant (500W) PSU has been tested to support the motherboard power requirements with the following configuration: CPU: AMD FX-62 Memory 1024 MB DDR2
  • Asus M4N72-E | User Manual - Page 36
    133 / 100 / 66 signal cable: blue, black, and gray. Connect the blue connector to the motherboard's IDE connector, then select one of the following modes to configure your devices: Single device Two devices Drive ", ensure that all other device jumpers have the same setting. 1-24 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 37
    , you can create a RAID 0, RAID 1, RAID 0+1, RAID 5, or JBOD configuration through the onboard NVIDIA® nForce 750a SLI controller. • SATA 5-6 connectors support AHCI mode and RAID mode only. Make sure to install the AHCI driver or RAID driver in the bundled support DVD before connecting devices to
  • Asus M4N72-E | User Manual - Page 38
    mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. 1-26 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 39
    of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB 2.0 module is purchased separately. 8. Floppy disk drive connector (34-1 pin
  • Asus M4N72-E | User Manual - Page 40
    allows you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, or MPEG card. 10. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) ports. The S/PDIF module is purchased separately. 1-28 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 41
    you connect a high-definition front panel audio module to this connector to avail of the motherboard high-definition audio capability. • If you want to connect a high-definition front panel audio module to this connector, ensure that the Front Panel Select item in the BIOS is set to [HD Audio]. If
  • Asus M4N72-E | User Manual - Page 42
    module to a slot opening at the back of the system chassis. Never connect a USB cable to the IEEE 1394a connector. Doing so will damage the motherboard! 1-30 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 43
    front panel cables in a few steps. Refer to the instructions below to install the ASUS Q-Connector. 1. Connect the front panel cables to the ASUS Q- ASUS Q-Connector to the system panel connector, making sure the orientation matches the labels on the motherboard. 3. The front panel functions
  • Asus M4N72-E | User Manual - Page 44
    to avail all motherboard features. • The contents of the Support DVD are subject to change at any time without notice. Visit the ASUS website at www.asus.com for updates. • For detailed software instructions, see the Manual folder in the Support DVD or download the latest software manual from the
  • Asus M4N72-E | User Manual - Page 45
    restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS Update or AFUDOS utilities. 2.1.1 Creating a bootable floppy disk To create a bootable floppy disk 1. Insert a formatted, high density 1.44MB floppy disk to the floppy disk drive. 2. Follow the instructions based on
  • Asus M4N72-E | User Manual - Page 46
    with the motherboard package. Installing ASUS Update To install ASUS Update: 1. Place the support DVD in the optical drive. The Drivers menu appears. 2. Click the Utilities tab, and then click Install ASUS Update. 3. Follow the onscreen instructions to complete the installation. Quit all Windows
  • Asus M4N72-E | User Manual - Page 47
    without having to use a bootable floppy disk or a DOS‑based utility. Download the latest BIOS file from the ASUS website at www.asus.com. To update the BIOS using EZ Flash 2: 1. Insert the floppy/USB flash disk that contains the latest BIOS file to the floppy disk drive or the USB port, then launch
  • Asus M4N72-E | User Manual - Page 48
    the floppy disk. A:\>afudos /iM4N72E.ROM Press . Do not shut down or reset the system while updating the BIOS to prevent system boot failure! 4. The utility returns to the DOS prompt after the BIOS updating process is completed. Reboot the system from the hard disk drive. 2-4 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 49
    updating process. You can update a corrupted BIOS file using the motherboard support DVD or the floppy disk that contains the updated BIOS file. • Prepare the motherboard support DVD or the floppy disk containing the updated motherboard BIOS before using this utility. • For the M4N72-E motherboard
  • Asus M4N72-E | User Manual - Page 50
    under the Exit Menu. See section 2.9 Exit Menu. • The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website at www.asus.com to download the latest BIOS file for this motherboard. 2-6 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 51
    fields General help BIOS SETUP UTILITY Main Ai configuration Ai Tweaker For changing the overclocking settings Advanced For changing the advanced on the keyboard until the desired item is highlighted. • The BIOS setup screens shown in this chapter are for reference purposes only, and
  • Asus M4N72-E | User Manual - Page 52
    the screen. BIOS SETUP UTILITY Main Advanced Power Boot Tools Exit Suspend Mode Auto] Repost Video on S3 Resume [No] ACPI 2.0 Support Disabled] ACPI APIC support [Enabled] (C)Copyright 1985-2008, American Megatrends, Inc. Scroll bar Pop-up window 2-8 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 53
    of IDE devices. There is a separate submenu for each IDE device. Select a device item then press to display the IDE device information. The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART
  • Asus M4N72-E | User Manual - Page 54
    are specifically configuring a CD-ROM drive. Select device information. The BIOS automatically detects the supports multi-sector transfer feature. When set to [Disabled], the data transfer from and to the device occurs one sector at a time. Configuration options: [Disabled] [Auto] 2-10 ASUS M4N72
  • Asus M4N72-E | User Manual - Page 55
    allows the onboard storage driver to enable advanced Serial BIOS automatically detects the items in this menu. BIOS Information Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specification. System Memory Displays the auto-detected system memory. Chapter 2: BIOS
  • Asus M4N72-E | User Manual - Page 56
    CPU and memory modules you install on the motherboard. BIOS SETUP UTILITY Main Ai Tweaker Advanced Power Boot Tools Exit Configure System Frequency/Voltage AI Overclocking DRAM Frequency Control HT Link Speed CPU Voltage CPU/NB Voltage CPU ] [Manual] 2-12 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 57
    CPU-Northbridge HyperTransport link speed. Configuration options: [Auto] [200 MHz] [400 MHz] [600 MHz] [800 MHz] [1 GHz] [1.2 GHz] [1.4 GHz] [1.6 GHz] [1.8 GHz] Memory Configuration This item appears only when you set the AI Overclocking item to [Manual to DIMMs even the memory slots are no populated
  • Asus M4N72-E | User Manual - Page 58
    options for some of the following items vary depending on the DIMMs you install on the motherboard. DRAM Command Rate [Auto] Allows selection of the DRAM command rate. Configuration options: [Auto only when you set the DCT0/DCT1 Strength Config item to [DCT 0] or [Both]. 2-14 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 59
    options: [Auto] [300 ohms +/- 20%] [150 ohms +/- 20%] [75 ohms +/- 20%] DQS Timing Configuration This item appears only when you set the AI Overclocking item to [Manual] and allows you to adjust the DQS values. The following sub-items appear only when you set the DQS Timing Configuration item to
  • Asus M4N72-E | User Manual - Page 60
    FSB overclocking ability or [Enabled] for EMI control. Configuration options: [Disabled] [Enabled] 2.4.12 PCIE Spread Spectrum [Disabled] Set to [Disabled] to enhance PCIE overclocking ability or [Linear Down] for EMI control. Configuration options: [Disabled] [Linear Down] 2-16 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 61
    show the CPU-related information that the BIOS automatically detects. GART Error Reporting [Disabled] This option should remain disabled for the normal operation. The driver developer may enable it for testing purpose. Configuration options: [Disabled] [Enabled] Microcode Updation [Enabled] Allows
  • Asus M4N72-E | User Manual - Page 62
    support. Configuration options: [Disabled] [Enable] NVIDIA Core Calibration [Disabled] Allows you to select the CPU core overclocking for each or all CPU to report and correct memory errors. Set this item adjust the DRAM BG Scrub sub-item manually. You may also adjust all sub-items by ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 63
    Cache RAM to be corrected when idle. Panel Select [HD Audio] Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or high-definition audio depending on the audio standard that the front panel audio module supports. Configuration options: [AC97] [HD Audio] Chapter 2: BIOS
  • Asus M4N72-E | User Manual - Page 64
    the advanced settings for PCI/PnP devices. Plug And Play O/S [No] When set to [No], BIOS configures all the devices in the system. When set to [Yes] and if you install a Plug device is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto] 2-20 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 65
    [S3 Only] - E nables the system to enter the ACPI S3 (Suspend to RAM) sleep state (default). In S3 sleep state, the system appears to be off and No] Determines whether to invoke VGA BIOS POST on S3/STR resume. Configuration options: [No] [Yes] 2.6.3 ACPI 2.0 Support [Disabled] Allows you to add
  • Asus M4N72-E | User Manual - Page 66
    on the PS/2 keyboard to turn on the system. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: Monitor CPU/MB Temperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the motherboard and CPU ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 67
    PWM Fan] This item appears only when you set the CPU Q-Fan Function item to [Enabled] and allows you to select the CPU fan type you installed on the motherboard. Configuration options: [PWM Fan] [DC Fan] • If speed. Configuration options: [Performance] [Optimal] [Silent] Chapter 2: BIOS setup 2-23
  • Asus M4N72-E | User Manual - Page 68
    : [1st FLOPPY DRIVE] [Hard Drive] [ATAPI CD-ROM] [Disabled] 2.7.2 Boot Settings Configuration Quick Boot [Enabled] Enabling this item allows the BIOS to skip some power on self tests (POST) while Press DEL to run Setup during POST. Configuration options: [Disabled] [Enabled] 2-24 ASUS M4N72-E
  • Asus M4N72-E | User Manual - Page 69
    press . The message "Password Uninstalled" appears. If you forget your BIOS password, you can clear it by erasing the CMOS Real Time Clock (RTC) RAM. See section 1.9 Jumpers for information on how to erase the RTC RAM. After you have set a supervisor password, the other items appear to allow
  • Asus M4N72-E | User Manual - Page 70
    Flash 2 Express Gate Enter OS Timer Reset User Data ASUS O.C. Profile AI NET 2 [Enabled] [10 Seconds] [No] Press ENTER to run the utility to select and update BIOS. This utility supports 1.FAT 12/16/32 (r/w) 2.NTFS (read only) 3.CD-DISC (read only) ←→ Select Screen ↑↓ Select Item Enter
  • Asus M4N72-E | User Manual - Page 71
    only. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/CPU configuration and BIOS version. • Only the "xxx.CMO" file can be loaded. 2.8.4 AI NET 2 Check Realtek LAN cable
  • Asus M4N72-E | User Manual - Page 72
    other than System Date, System Time, and Password, the BIOS asks for a confirmation before exiting. Discard Changes This option window appears. Select OK to load default values. Select Exit & Save Changes or make other changes before saving the values to the non-volatile RAM. 2-28 ASUS M4N72
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Motherboard
M4N72-E