Asus M4N72-E User Manual - Page 58

The configuration options for some of the following items vary depending on the DIMMs you install on the motherboard. DRAM Command Rate [Auto] Allows selection of the DRAM command rate. Configuration options: [Auto] [1T] [2T] DRAM Timing Mode [Auto] Allows selection of the DRAM Timing Mode. Configuration options: [Auto] [Both] The following sub-items appear only when you set the DRAM Timing Mode item to [Both]. DCT0 1st Information: 5-5-5-3(5)-15-20-5-3 TCL [Auto] Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] [7 CLK DH_Only] TRCD [Auto] Configuration options: [3 CLK] [4 CLK] [5 CLK] [6 CLK] [Auto] TRP [Auto] Configuration options: [3 CLK] [4 CLK] [5 CLK] [6 CLK] [Auto] TRTP [Auto] Configuration options: [Auto] [2-4 CLK] [3-5 CLK] TRAS [Auto] Configuration options: [5 CLK] [6 CLK] - [17 CLK] [18 CLK] [Auto] TRC [Auto] Configuration options: [11 CLK] [12 CLK] - [25 CLK] [26 CLK] [Auto] TWR [Auto] Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] TRRD [Auto] Configuration options: [2 CLK] [3 CLK] [4 CLK] [5 CLK] [Auto] DCT0 2nd Information: 7-75-105 TWTR [Auto] Specifies the write to read delay when accessing the same DIMM. Configuration options: [1 CLK] [2 CLK] [3 CLK] [Auto] TRFC0 [Auto] Configuration options: [Auto] [75ns] [105ns] [127.5ns] [195ns] [327.5ns] TRFC1 [Auto] Configuration options: [Auto] [75ns] [105ns] [127.5ns] [195ns] [327.5ns] DCT0/DCT1 Strength Config [Auto] Allows adjustments of the advanced DRAM strength parameters. Configuration options: [Auto] [DCT 0] [DCT 1] [Both] The following sub-items appear only when you set the DCT0/DCT1 Strength Config item to [DCT 0] or [Both]. 2-14 ASUS M4N72-E