Asus M4N72-E User Manual - Page 59

DQS Timing Configuration

Page 59 highlights

DCT0:CKE drive strength [Auto] Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x] DCT0:CS/ODT drive strength [Auto] Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x] DCT0:Address/Command drive str [Auto] Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x] DCT0:MEMCLK drive strength [Auto] Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x] DCT0:Data drive strength [Auto] Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x] DCT0:DQS drive strength [Auto] Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x] DCT0:Processor on-die terminat [Auto] Configuration options: [Auto] [300 ohms +/- 20%] [150 ohms +/- 20%] [75 ohms +/- 20%] The following sub-items appear only when you set the DCT0/DCT1 Strength Config item to [DCT 1] or [Both]. DCT1:CKE drive strength [Auto] Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x] DCT1:CS/ODT drive strength [Auto] Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x] DCT1:Address/Command drive strength. [Auto] Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x] DCT1:MEMCLK drive strength [Auto] Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x] DCT1:Data drive strength [Auto] Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x] DCT1:DQS drive strength [Auto] Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x] DCT1:Processor on-die termina [Auto] Configuration options: [Auto] [300 ohms +/- 20%] [150 ohms +/- 20%] [75 ohms +/- 20%] DQS Timing Configuration This item appears only when you set the AI Overclocking item to [Manual] and allows you to adjust the DQS values. The following sub-items appear only when you set the DQS Timing Configuration item to [DCT 0], [DCT 1], or [Both]. CKE Setup Time [Auto] Allows selection of the CKE setup time. Configuration options: [Auto] [1/2 CLK] [1 CLK] Chapter 2: BIOS setup 2-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

Chapter 2: BIOS setup
2-15
DCT0:CKE drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT0:CS/ODT drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT0:Address/Command drive str [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT0:MEMCLK drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT0:Data drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT0:DQS drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT0:Processor on-die terminat [Auto]
Configuration options: [Auto] [300 ohms +/- 20%] [150 ohms +/- 20%] [75 ohms +/- 20%]
The following sub-items appear only when you set the
DCT0/DCT1 Strength Config
item
to [DCT 1] or [Both].
DCT1:CKE drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT1:CS/ODT drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT1:Address/Command drive strength. [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT1:MEMCLK drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT1:Data drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT1:DQS drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT1:Processor on-die termina [Auto]
Configuration options: [Auto] [300 ohms +/- 20%] [150 ohms +/- 20%] [75 ohms +/- 20%]
DQS Timing Configuration
This item appears only when you set the
AI Overclocking
item to [Manual] and allows you to
adjust the DQS values.
The following sub-items appear only when you set the
DQS Timing Configuration
item to
[DCT 0], [DCT 1], or [Both].
CKE Setup Time [Auto]
Allows selection of the CKE setup time.
Configuration options: [Auto] [1/2 CLK] [1 CLK]