Asus M5A97 LE R2.0 M5A97 LE R2.0 User's Manual - Page 37
M5A97 LE R2.0 Chassis intrusion connector
View all Asus M5A97 LE R2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
7. Serial port connector (10-1 pin COM1) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. COM1 PIN 1 RXD DTR DSR CTS DCD TXD GND RTS RI M5A97 LE R2.0 M5A97 LE R2.0 Serial port (COM1) connector The COM module is purchased separately. 8. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. CHASSIS M5A97 LE R2.0 M5A97 LE R2.0 Chassis intrusion connector M5A97 LE R2.0 1-23 +5VSB_MB Chassis Signal GND Chapter 1